k type and t type,China k type and t type Manufacturers, Suppliers

Needle roller bearing

Feb 25, 2012

... cages, ribs or seals.Accuracy:Dimensional tolerance and geometrical accuracy is based on GB/T 5801(ISO. 1206) The mutual-difference ... 300C---+1000C. Needle roller and cage assemblies Structure:There are single-row K-type and double-row K… ZW-type for this kind of ... bearings. Special structure of single row K… D-type and double row K… ZW-type ...

Supplier: Shanghai Ixin Bearing Limited

[China Manufacturers]

E27/E40/E14/B22D/etc Go no go Gauge

Mar 20, 2013

... called High Frequency Current Source. It's used for lamp and ballast manufacturing.CH338: Digital Torsion Test Instrument. Range: 0 ... . This instrument can simultaneously test 16 products, while judging and recording the on-off times of single products.TMP-8 ... signal. T type or K type thermocouple.GNG-*: Go no go gauge. According to IEC request, Lisun produced high accuracy and high quality "Go" and " ...

Supplier: Lisun Electronics (Shanghai) Co., Ltd.

[China Manufacturers]

N-8000 Series Intelligent Digital Display Controller (New product in national class )

Jul 14, 2012

... -10mA continuous currentI2:4-20mA continuous currentS:S type thermocoupleK:K type thermocoupleE:E type thermocoupleT:T type thermocoupleJ:Jtype thermocoupleB:Btype thermocoupleAlarm output10:without alarm1 ... )Usage environmentTemperature 0-50 °c, relative humidity≤85%, without corrosion and conductive dust. N-8000 Series Intelligent Digital Display Controller (New ...

Supplier: Shanghai Yatai Instrumentation Co., Ltd.

[China Manufacturers]

Ductile Iron Pipe Fittings

Aug 31, 2012

... is reliable, accurate size, wall thickness, internal and external surfaces of the joint ductile iron Detailed ... is reliable, accurate size, wall thickness, internal and external surfaces of the joint ductile ironwe can provide ... the OEM service,and produce the items according the drawings you provideDuctile ... DN800, as well as a variety of K-type T-ductile iron pipe.

Supplier: Shenyang Minmetal Imp. & Exp. Co., Ltd.

[China Manufacturers]

air compressor

May 02, 2012

... ; air compressor1,Type of ZYBW...K type dry running vacuum pressure combined pump can supply +-60kPa rated vacuum and compressed air simultaneously ... air simultaneously. Which is the upgrade and renew product of ZYBA type oil pump and ZYBWB type dry pump, can supply . ... low noises, low temperature-rising and convenient maintenance etc... 3,Type of ZYBW...F type dry running vacuum pressure combined pump ...

Supplier: Guangzhou Jingli Printing Equipment Co., Ltd.

[China Manufacturers]

Multi-functional high speed electronic engraving machine

May 24, 2012

... prize of many national patents, includes: Patent of practicality new type 012101210661.5, patent of outside design 01 3 10638.4 ... mould, the manufacturing of forming electrode for electric spark, 24 k gold and pure silver goods, forming of VCD mould, molding of ... materials on decorated plating, odd metal plating, alloy plating, special type plating, etc. it not only for hanging plating, but roll ...

Supplier: Shanghai Shangjun Trading Co., Ltd.

[China Manufacturers]

square towels

Mar 30, 2013

... towel ,Embroidery towel,Velourtowel,Terry Towel,etc.(3).Towel type:All kinds of towel,including Handkerchief,mini towel,wash towel ... ,retailtowel,Christmastowel(5).Towel size:any sizes and weights is Ok.B. COMPRESSED TOWEL AND T-SHIRT FEATURES 1. Material: 100% cotton2 ... . Our products with novel design and fashionable patterns, they ...

Supplier: Rizhao Good Hope Textiles & Crafts Factory

[China Manufacturers]

F/F Ball Valve

Mar 30, 2013

... 1.Good design, low cost, easy to install and transport. 2.Recyclable, environmental and healthy. 1.Screw:1).zinc plated steel 2 ... :forged steel handle, aluminium handle, Steel handle with plastic cover and “T”type aluminium handle(butterfly handle) 3).O-Ring:Viton/N.B ...

Supplier: Zhejiang Best Plastics Co., Ltd.

[China Manufacturers]

EN545 EN598 ISO2531 DI Pipes

Feb 07, 2013

... ) Yield: >10% 13) Hardness: <230HB 14) K type mechanical joint with flange and bolts available 15) Process and testing: a) Blast furnace (Analysis of ... (Thickness testing) i) External coating (Thickness test) Mechanical joint pipe and fittings are also available. Packing: in bulk or 20' container

Supplier: Shanxi Solid Industrial Co., Ltd.

[China Manufacturers]

ISO2531/BSEN545 Double flanged pipe

Jan 03, 2013

... or BS EN545, the coating of the fitting is zinc and bitumen or epoxy.1, Standards : ISO2531, ISO4422, EN545 , EN598 , ... layer, steel crates .5, accessories such as gaskets , bolts and nuts available upon request .6, flanged pipe fittings , double flange ... pipe, push-on Tyton socket fittings , Ductile iron/PVC fittings, K type bolted gland fittings . AWWA C110 flanged pipe fittings ISO2531/BSEN545 ...

Supplier: Qingdao Valtech Manufacturing Co., Ltd.

[China Manufacturers]

galvanized steel pipe

Apr 15, 2012

... pipe,qualitified Ductile iron pipes used for drinkable water supply and sewage system available , products standards conform to ISO2531 ,EN545pipes , ductile ... : >420MPa10) Yield: >10%11) Hardness: <230HB12) K type mechanical joint with flange and bolts available13) Process and testing: a) Blast furnace (Analysis of raw ...

Supplier: Shijiazhuang Ruiyuanxiang I/E Co., Ltd.

[China Manufacturers]

Select resistente bomba de pulpa

Mar 30, 2013

... multi-purpose pumps, acid-base type clear liquid and slurry apply.- Used ultra-high molecular weight polyethylene lined and stainless steel structure, lining ... resistance.- The separate and close type impeller to be optioned according to state media.- Seal;K-type dynamic seals, G3-type mechanical seal.-3)Applicable ...

Supplier: Hebei Tongda Pump & Valve Group Co., Ltd.

[China Manufacturers]

Copper tube/copper pipe

Nov 07, 2012

... ASTM B88 Nominal Standard Size inchOutside Diameter inchWall thickness and tolerances(inch)calculated Weight 1b/ftType KKType LLType MMType ... ISO9001-2000, ISO14001.2. 20 years` experience of manufacturing and exporting in the line of copper fitting.3. Experienced technical ... step Quality control. Inspect the raw material, unfinished products and finished products.6. Our moulds cover almost all of the ...

Supplier: Zhuji Xin Hai Refrigeration Fittings Co., Ltd.

[China Manufacturers]

KWPK centrifugal water pump

Sep 26, 2012

... clogging, rear dissembling structure and convenient maintenance and overhaul; there are a variety of impellers to be selected. (K-type closed without clogging, N ... -type closed multi-vanes, O-type Open, F-type free flow, E-type single-vane and Ex-type widened-flow ...

Supplier: Shijiazhuang Kingda Pump Industry Group Co., Ltd.

[China Manufacturers]

Copper Pipe

Oct 29, 2012

... : Standard ASTM B88 Nominal Standard Size inchOutside Diameter inchWall thickness and tolerances(inch)calculated Weight 1b/ftType KKType LLType MMType KType ...

Supplier: Zhejiang Tianxing Pipe Manufacture Co., Ltd.

[China Manufacturers]

Influenza A Ag RAPID TEST STRIP(ISO9001+ISO13485)

Apr 15, 2012

... an immunochromatographic assay for the qualitative detection of the influenza type A antigen (including the subtype H1N1) from the secretions ... 3. INTERPRETATION OF RESULTSPositive: The presence of both C band and T band. Negative: Only clear C band appears.Invalid: No ... there is suspect. 6.4. Cross- reactionNo cross reaction with type B, C influenza virus, adeno virus, parainfluneza, coronavirus which ...

Supplier: Quicking Biotech Co., Ltd.

[China Manufacturers]

Hot Sell mini chemical lab reactor

Mar 13, 2012

... standard equipped 2.K-type sensor,high temperature control precision Application:Catalysis,high temperature and pressure synthesis,dynamics ... testing,Fischer-Tropsch,and hydrogenation reaction.Technical Highlights:1 ... communication interface with a computer connected to print and able to show the historical value of a ...

Supplier: Xi'an Taikang Biotechnology Co., Ltd.

[China Manufacturers]

KMC75H Small Wheel Loader

Mar 14, 2012

... which is convenient to operate; and wheel loader structure is simple, performance is good, and quality is reliable.KMC75H Wheel ... emergency brakeOil CapacityFuel tank: 423LEngine crank case: 32LT/C and T/M: 38LHydraulic tank: 300LF/R axles: 51L(for each ... 441mmCabin Vibration-absorbed humanistic cabin with adjustable steering wheel and seat, and streamline dashboard provide low noise, air conditioning, ...

Supplier: KAMA International Trade & Technology Co., Ltd.

[China Manufacturers]

16m3 bulldozer SD42-3

Oct 20, 2012

... Features:1,Single-hand, electronic-control gear shift and steering systems; 2,Working device controlled by PPC ... 5,Central pressure measurement, central lubrication, and automatic track tensioning; 6,ROPS and FOPS. Specification: Blade TypeSemi-U BladeMin. ... )0-4.40-8.20-14.8Undercarriage System: Type………………………………………K type elastic suspended structureCarrier rollers(each side)………………2Track rollers(each ...

Supplier: Shanghai Canmax Electronic & Mechanical Equipment Co., Ltd.

[China Manufacturers]

PBC110 CNC Horizontal Milling & Boring Machine

Nov 18, 2012

... hardening. Machines of this series are of T-type layout with good rigidity and can realize control of six axes i.e ... Machines of this series are ideal equipments for machining box-type work-pieces with multi-holes of high accuracy of hole ... size1000×1250(1250×1250,1250×1400OptionmmMax. Load on the table5000kgWorktable And T Slot22×7Dia. of spindle110mmTaper of spindleISO7:24No50Speed of spindle10- ...

Supplier: Shenyang C&A Machinery I/E Co., Ltd.

[China Manufacturers]