jsc270 c mechanical properties,China jsc270 c mechanical properties Manufacturers, Suppliers

Gr2 Gr5 6Al4V Titanium Bar

Mar 14, 2013

... ) Medical Class: ASTM F136(Eli 6AL4V) ;ASTMF 67(Gr 2) c)Sizes: custom sizes are available d)Grades: Gr 1, Gr ... , Gr 5, Gr 7, Gr 9, Gr 12 e)Test: mechanical properties test f)Applications: offshore, chemical processing, medical instruments,etcPacking:Box ...

Supplier: Xuyi Titan And Material Co., Ltd.

[China Manufacturers]

Cold rolled stainless steel sheets

May 26, 2012

... and technical specialists.Technical parameter Chemical CompositionElement201202304316316L 430(coil only)C≤0.15≤0.15≤0.08≤0.08≤0.035 ... Cr16-1817-1918-2016-1816-1816-18Mo 2-32-3 Mechanical PropertiesTensile strength≥535≥520≥520≥520≥520 Yield strength≥245 ...

Supplier: Jinzhong Xindayu Stainless Steel Products Co., Ltd.

[China Manufacturers]

check valve

Apr 01, 2013

... parameters:1. Material: GRP BMC HDPE Cr13 Q2352.Temperature: -20°C-60°C (requirements under the maximum design 3.temperature 120 ... °C flap valve)4. Working pressure: 1-1.6MPa5.Opening angle ... fabric reinforced polymer composites flap valve basic characteristic1. Excellent mechanical properties, physical properties This material density is usually 1.8-2.1g/cm ...

Supplier: Hebei Sinta FRP Trading Co., Ltd.

[China Manufacturers]

0Cr18Ni9 stainless steel sheet

Mar 26, 2013

... for pipinggeneral pipe for piping(drinking water pipe), mechanical construction/liquid transfer pipe, boiler heat exchange tube ... corrosive resistance, heat resistance, low temperature strength, mechanical properties are excellent. There is no hardening occurred after ... heat resistance are excellent.--low temperature strength and mechanical properties are excellent.--Single-phase austenite, there is ...

Supplier: Everbright Steel Co., Ltd.

[China Manufacturers]

28Cr4(1.7030) special steel

Jan 01, 2013

... the surface of the quenching process parts.2.Chemical ingredients:C: 0.24 ~ 0.31Si: >0.40Mn: 0.60 ~ 0.90S ... 0.25 copper Cu: allow residual content than 0.0303.Mechanical properties:Tensile strength σ b (MPa) : frequency 885 (90)The yield strength ... and metallographic organization:Heat treatment specification: quenching 860 °C, the oil cold; Tempering 500 °C, water, oil, and cold.5.Delivery status ...

Supplier: Henan Shunxiang Industry Co., Ltd.

[China Manufacturers]

Inconel 625 Weld Wire

Apr 01, 2013

... g/cm³Melting point1290-1350°CInconel 625 Alloy m inimum mechanical properties in the room temperature Alloy statusTensile strengthRm N/mm²Yield ... structural parts. 625 have application in sea-water for local mechanical stress attach.

Supplier: Shanghai Yikai Metal Products Co., Ltd.

[China Manufacturers]

coil cold rolled steel dc04

Apr 01, 2013

... Hanggang, Wugang.PackageStandard export sea-worthy packingTerms of PaymentL/C or T/TDelivery DetailWithin 3-15 days after receipt ... of deposited or L/C at sight Certificate BV, Intertek and ISO9001:2008 ... vessel industries. 3. Ship building, Engineering construction, 4. Mechanical manufacturing, Pavement slab, ect.Other productsShip plateBoiler steel plateCorrosion resistant ...

Supplier: Tianjin Jianghailong Steel Co., Ltd.

[China Manufacturers]

310S The Stainless Steel Seamless Pipe

Mar 12, 2013

... equipment, aviation, boiler heat-exchanger and Other fieldsChemical composition & Mechanical properties TypeChemical Composition(%)Mechanical propertiesASTMCCrNiMoOthersHeat Treatment Yield strength(N/mm2)Tensile strengthElongation(%) HardnessHBHRBHV304 ... ≤200321≤0.0817.0~19.09.00~13.00-Ti5×C%overS≥205≥520≥40≤187≤90≤200 310S The Stainless ...

Supplier: Tianjin Dingxin High Pressure Alloy Pipe Trade Co., Ltd.

[China Manufacturers]

sae 1008B wire rod

Dec 30, 2012

... : wire drawing,welding electrode, nail6.Payment term: TT or L/C at sight Please kindly find our chemistry of our material ...

Supplier: Tangshan Xinxin Special Steel Co., Ltd.

[China Manufacturers]

Round bar factory for sale 202

Apr 01, 2013

... , etc. Workability: Easy to Weld, Moderate Cutting, Forming and Machining. Mechanical Properties: Brinell = 170, Tensile = 85,000 +/-, Yield = 34,000 +/-, NonmagneticHow is ... export packing, or as per customer's requestsPaymentT/T, L/C, etc.trade Terms FOB/CFR/CIFetc.We specialize in stainless ...

Supplier: Jiangsu Zhongchang Metal Products Co., Ltd.

[China Manufacturers]

steel wire rod

Sep 10, 2012

Commodity:steel wire rod Grade: SAE1008B Dia:5.5/6.5/8/10/12mm coil weight:2MT GradeChemical Composition(%)CMnSiSPBSAE1008B0.10max0.3~O.500.15max0.050max0.040 max0.0008 minMechanical propertiesYield strength(N/mm2)Tensile strength(N/mm2)Elongation(%)≥195315-430≥30Shenda steel co., ltd & Xingtuo trading co., ltd(China),the leading manufacturer specialized in steel wire rod,U channel,angles,H beam ...

Supplier: Tangshan Shenda Steel Co., Ltd.

[China Manufacturers]

Z275 Hot dipped galvanized steel strip

Apr 01, 2013

... .20-1.600.20-0.60≤0.050≤0.045Mechanical Properties Steel gradeTensile testYield point σb(Mpa)Strength of extensionσb ...

Supplier: Wuxi Baile Sheet Metal Co., Ltd.

[China Manufacturers]

square tube

Apr 01, 2013

... Cr:16.0-18.0 Mo:2.0-3.0 Mechanical properties of 316L stainless steelTensile strength (Mpa) 620 MIN yield strength ... advance , 70% after receiving the B/L Large quantity : L/C at sightDelivery Time15 days after received depsoit of T/T ...

Supplier: Wuxi Xinguo Sales of Steel Pipe Co., Ltd.

[China Manufacturers]

Alloy structural steel AISI 4340

Aug 18, 2012

... 0.60-0.901.25-1.750.15-0.25Mechanical Properties Tensile Strength (Mpa)Yield Strength (Mpa)Elongation (%)Reduction in Area ...

Supplier: Shanghai Changjin Metal Product Co., Ltd.

[China Manufacturers]

TT high quality ductile iron outdoor Fire hydrant

Apr 01, 2013

... materialsDuctile iron,Grey iron,Scrap steel, alloy PaymentT/T , L/C and so on Delivery60days Chemical compositionC , Si , Mn ,P ,S ... have our machine factory FunctionPut out a fire ProcessSand treatmentThe Mechanical properties of ductile iron casting : Number Tensile strength (Mpa)Yield strength ...

Supplier: Qingdao Tiantong Casting Co., Ltd.

[China Manufacturers]

welding wire

Jun 07, 2012

... .850.80-1.15≤0.035≤0.025≤0.50Mechanical Properties of Deposited MetalTensile Strength (Mpa)Yield Strength (Mpa)Elongation (%)Temperature ... (°C)Tensile Num KAV≥500≥420≥22-29≥27Recommended Welding Current, ...

Supplier: Dezhou Hualude Hardware Products Co., Ltd.

[China Manufacturers]

321 Prime Square Pipe

Oct 25, 2012

... in advanced, 70% T/Tbefore shipment or 70%L/C at sight ) Delivery time5days after receive 30% deposit ... Meng LuTEL-86-022-26840320FAX-86-022-26840320Chemical composition & Mechanical properties Manufacturing process : seamless pipe : Organizational chart Production Field ... sheet ,we can provide C10100,C10200,C12000,C12000 ,Properties:1) high flexibility2) excellent ductility and corrosion resistance3) ...

Supplier: Tianjin Binbo Junchi Stainless Steel Co., Ltd.

[China Manufacturers]

Elbow 90 Deg 3/8 inch, NPT, Galvanized Malleable Iron

Mar 05, 2013

... . Our products are of qualified material, in good finish, well mechanical property, competitive price, they are highly appreciated and well sold ... : ANSI/ASME B16.3-85Threads: ANSI/ASME B1.20.1Mechanical properties:Tensile Strength≥33kg/mm2Elongatin≥8%Hardness

Supplier: Shijiazhuang Jizhong Malleable Iron Co., Ltd.

[China Manufacturers]

CNBM ISO2531/EN545 Ductile Iron pipe Fittings

Jan 27, 2013

... Brand Name CMAX CNBM manufactures Ductile Iron Push-on Joint & Mechanical Joint Fittings which conform to Product standards: EN 545:2002 ... also available from us. 1. Composition of raw material:l C: 3.4 - 3.7%l Si: 2.0 - 2.4 ... : ≤0.30%Average Density of Metal is approximate 7050kg/m2. Mechanical Properties ItemTensile Strength N/mm2Elongation %Proof Stress N/mm2Hardness HBDN80 to ...

Supplier: CNBM International Corporation

[China Manufacturers]

stainless steel wire clips(ISO9001)

Oct 31, 2012

... cycles, Automobile and car wheelsCharacteristics: Bright surface from defects; Corrent mechanical properties stable T/S. Stainless Steel Weaving Wire (WEA) Steel grade ... ) Delivery lead time: 15days after received T/T or L/C.2) Payment term: T/T 30% in adbcnce payment, 70 ...

Supplier: Anping Yuehua Metal Wire Mesh Products Co., Ltd.

[China Manufacturers]

Page 24 Of 50 First Precede 20 21 22 23 24 25 26 27 28 29 Next Last