About Yuxing
Weihui Yuxing Printing Equipment Co., Ltd. is located in the industrial zone of Houhe town, Weihui City, Henan Province, which strictly passed ISO9001 international quality standards and enjoys comfortable environment and convenient transportation facility.
Weihui Yuxing Printing Equipment Co., Ltd mainly specialized in manufacturing positive PS plate, CTCP plate and CTP plate. The products are made of high-quality material of aluminum, manufactured with advanced equipment which brought about from England, and passed through strictly Quality Control to ensure high quality.
Main Technical Parameters
Name:Conventional Positive PS Plate | ||||
Main Technical Parameters | ||||
Product Type | FPS-A | FPS-K | FPS-H | FPS-D |
Application Type | High quality long run color printing | Newspaper printing and rotary press printing | The short edge fine Color Printing | Light printing |
Plate Features | Smooth coating, high sensitive speed,large exposure and developing latitude,quick ink water balance,long impression | Abrasion resistant grains, Precise size, excellent dot reappearance, quick ink water balance, super long impression | Multi layer grains, Seal Pore process, smooth coating, fast sensitive speed, long reserving time | Economical printing,high sensitive speed,perforation by international standard |
Aluminium Substrate | Southwest Aluminum Group/Mingtai Aluminium Group | |||
Plate Thickness | 0.15~0.30mm | |||
Maximum Coil Width | 1350nm | |||
Exposure Energy | 30 seconds with 3kw iodine-galium lamp distance:1.2 meters | |||
Developing Temperature | 23~25°C | |||
Developing Time | 20±5Secs | |||
Safelight | Under yellow light | |||
Resolution | 2-98% at 200lpi | |||
Run Length | 100,000 coipes unbaked,1,200,000 coipes unbaked(Actual run length may vary according to printing machine,ink) | |||
Shelf Life | 18 months | |||
Storage Conditions | The recommended storage conditions are 10~25°C,with 40%-60% humidity.Away from sunlight radiation & direct sunlight.Anti-humidity,Anti-acid & alkali. |
Operational Instructions:
1)Exposure:
In practice,the correct exposure time may vary according to the light source,bulb distance and quality of films etc.The suggested exposure level is 140 mj/cm2.
2)Developing:
Highly recommended to use the AONE PD-1 developer,mixing as per its operational instructions,suitable for automatic processing and tank processing.The developing tempersture is 25±2°C and the developing time is around 30 seconds.
3)Deletion:
Apply a little deletions to the unwanted image area on the plate wait for 30~60 seconds,then wash it with clean water.
4)Gum:
After deletion,spread the protection gum evently over the surface of the plate.Water-absorbing ability can be improved and applying gums guards against dust.
5)Baking:
Spread the baking gums over the entire plate surface to increase the press life of the plates then bake the plate for 5~7 minutes with a temperature between 200~230°C,rinse it after cooling,finally apply the protection gums.
6)Storage:
Open the package and handle the plates in yellow safe lights.Store in cool dry place,keep away from sunshine.Avoid strikes,bent and heavy pressure on it.The ideal tempreature for storage recommended is 30°Cand the relative humidity is 65%.The shelf life of the plates is normally 18 months.
More Information Contact Information