1. Color touch screen 2. Compact design 3. Brushless motor 4. Several options available 5. Splice table & Fine adjustment Specifications

Certification:	UL / cUL / CE
Protection class:	IP-54
Weight:	1.6 kg (3.5 lbs)
Operating ambient temperature:	0 to 50 degrees C (32 to 122 degrees F)
Power consumption:	130 VA
Input line frequency:	47-63 Hz
Maximum actuator output:	39 W at 30 V
Parallel port:	6 digital inputs, 2 open collector outputs
Universal input line voltage range:	100 VAC -10% to 240 VAC +10%
Sensor input:	2 independent edge sensors or 1 line guide sensor (SE-26 or SE-46)Max input ±20 mA, 0 to 10 mA (preferred)
Supply to accessories:	+12 V ±5%, 400 mA, -12 V ±5%, 150 mA
Internal fuse:	3.15 A
Servo center:	Analog inductive
Keypad layout:
Membrane Keys	8
Basic Functions	Auto, manual, servo-center
Sensor key selections	Left edge, right edge, center line, line guide
Setup keys	Auto setup, transparence setup (opacity), guide point adjustment,system and servo-center gain adjustment
	Jog left (- key), jog right (+ key)
	Enter key to complete function / setup or manual key to cancel

Feature:

1. The web guide controller is the heart of the electronic guiding system. Fife CE-compliant controllers provide you the control you need to operate effectively and efficiently. When combined with appropriate sensors, actuators, and guiding equipment, Fife controllers provide a highly accurate, Type I, proportional, closed-loop servo system with a high dynamic response to the running web.

2.The controller takes the sensor signal, which is proportional to the web position, processes and amplifies it, and then feeds it to a driver; the proportional output operates an electromechanical actuator. The actuator then positions the guide assembly to maintain the desired web lateral register. The correction rate is proportional to web deviation from the preset null (guide point) position at the sensor. System dead band is typically less that ± 0.005 mm (0.002 inch).

FIFE Web Guide controller