water-based ink for dx5 printer

Ink specification

1. This is water based liquid , it is non inflammables .

2, Vaccum packing , uts net weight is about 1000g , tolerance about 15g.

3. Quality guarantee within 12 months(seal), 2 months( unseal), refer to the production batch number to seee the production date .

4,Storage temperature : avoid light shinning room-temperature.(5-50 degrees)

5. Of insoluble particles smaller than 200nm.

6. Use environment at 15-30 degrees.

Caution :

1, Irritating to eyes . respiratory system and skin. Avoid contact with skin and eyes .

2, Please clean your hand if this material sticks on your hand or skin ,

3, Please keep this material and its container away from your kids.

4, Use it often after unsealing , in contact with air condition can not long stored.

5, Please place this material in the shade area , room temperature storage , avoild high temperature , low temperature and direct sunlight ,

6, It is soft packing , don't stress or use sharp prick packaging .

7, Read the instructions before using .

8, Disposal should be in accordance with local state or national legislation .

 Instruction

1, Shake before use .

2,Clean the ink tube with the special cleaning solution before using first time use of this product .

3, Don't mix using the different brand and model ink .

4, Ink bag appear natural phenomenon during preservation ; Please dissolve ice cold and filling shake well before use .

5, If any serious color difference while using , please confirm if the ink mixed with others or if the color management in the software is ticked wrong , if keep happen , please adjust the parameters in Rip software. or refer to the software factory for solution.

6,Other circumstances please contact our sales or service engineers in time.