Ads by Google
Introduction :
The 6×36,500KN hinge-type diamond synthesis cubic hydraulic press is an ultra-high pressure machine and one of the major equipment, which is widely, used in the synthetic diamond and super-hard material production sectors in China.
It has many advantages such as compact composition, flexible operation, easy maintenance quick putting into production and high profit return etc. It can meet the needs of research and production of abrasive grain synthetic diamond, big-grain mono-crystal synthetic diamond, polishing crystal diamond and polycrystalline diamond, Cubic nitrogen boron, PCD, PCBN synthetic material etc.
Major Technical Parameter :
Model: | CS-X | |
Nominal pressure(single cylinder): | 36500kN | |
Cylinder diameter: | Φ650mm | |
Working pressure: | six cylinder | 6/36500kN |
high pressure | 14.3Mpa | |
ultra-high pressure | 110MPa | |
Maximum stroke of cylinder piston | 100mm | |
Open height ( The distance from the small end face of bolster block to the center line of cubic chamber when the piston returns to the end) | 280mm (The height of bolster block is 152mm) | |
Close height ( The distance from the small end face of bolster block to the center line of cubic chamber when the piston goes forward at the maximum stroke ) | 180mm (The height of bolster block is 152mm) | |
Boosting ratio | 7.7:1 | |
Maximum stroke of booster piston | 460mm | |
Electrical heating power | 40KVA | |
Motor power | 15+11+5.5KW | |
Outer dimension (L×W×H) | 2900×2900×3450(mm) | |
Gross weight | 52.5 tons | |
Diamond synthetic cubic hydraulic press