Ads by Google
High temperature level gauge Melt Pressure sensor
n Overview
The VPH Series High Temperature Melt Pressure transducer/transmitters are widely used in the plastics, chemical fiber, rubber, boiler industry high temperature melt pressure measurement and control. The product is digested and absorbed domestic and foreign similar products technology, uses the high-quality sensors and components meticulous production, with a stable and reliable performance, high accuracy, good dynamic, small temperature drift, high temperature resistance, etc. Can match our smart meter VM201, VM202, VM302 supporting the use, consisting of high-reliability, high-temperature melt pressure measurement and control system.
Do not need any changes, can directly match the produce such as Italy Gefran, American DYNISCO.
n Specifications
Items | Standard | Plus |
Pressure range | 0~3.5, 5, 10, 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 100, 150MPa | |
Accuracy | ±0.5%FS, 1.0%FS, 1.5FS | ±0.1%FS, ±0.2%FS, ±0.3FS, |
Repeatability | ±0.3%FS, ±0.5%FS, | ±0.1%FS, ±0.2%FS, |
Input/Output impedance | 350±10%FS ohm | 350±5%FS ohm |
Output sensitivity | 1.5, 2, 3.3 mV/V ±2% | 2, 2.5, 3.3 mV/V ±2% |
Zero output | ≤ ±10%FS | ≤ ±5%FS |
Bridge excitation voltage input | 6, 10, 12V(Max.) | |
Insulation Impedance | 500M ohm@100V | |
Calibrating point | 80±2% | 80±1% |
Allowed Temperature | 80°C for Senor wiring connector, 400°C for probe(Max. 535°C by custom) | |
Temperature drift | ±0.05%FS/°C | ±0.02%FS/°C |
Probe zero drift | ≤ 0.3 MPa/100°C | ≤ 0.1 MPa/100°C |
Maximum fixing torque | 100 Nm | |
Mebrane material | 1Cr18Ni9Ti | 316L |
Connecting thread | M14x1.5, 1/2”-20UNF, M18x1.5, M22x1.5, M28x1.5, G3/4” | |
n Mechanical Specifications
D1 | M12x1.5 | M14x1.5 | 1/2”-20 | M18x1.5 | M22x1.5 | M28x1.5 | G3/4” | PF3/8” | 11/2-16” | 3.25” | 3.5” |
D2 | Ø7.8 | Ø7.8 | Ø7.8 | Ø10 | Ø10/Ø16 | Ø18 | Ø18 | Ø10 | Ø23.5 | Ø23.5 | Ø23.5 |
D3 | Ø10.2 | Ø11.8 | Ø10.5 | Ø15.5 | Ø19.5 | Ø24 | Ø24 | Ø14 | Ø33.5 | Ø33 | Ø33 |
D4 | Ø10 | Ø12 | Ø10.5 | Ø16 | Ø19 | Ø26 | Ø24 | Ø14.5 | |||
D5 | Ø14 | Ø12.7 | Ø18 | ||||||||
A | 5.5 | 5.5 | 5.5 | 6 | 10 | 11 | 11 | 8 | 13 | 13.5 | 13.5 |
B | 11 | 11 | 11 | 12 | 15.8 | 17 | 17 | 12 | 21 | 51 | 61 |
C | 16 | 16 | 16 | 18 | 30 | 28 | 28 | 30 | 37 | 19 | 19 |
L1 | 70, 150, 250 optional | ||||||||||
L2 | 300, 470, 700, 1000, 2000, 3000 optional | ||||||||||
Sealing | 45°inclined plane | Flat plane | Flange mounting | ||||||||
Note: D1=ø3.25” and ø3.5” are the flange dimension
n Dimensions
High temperature level gauge Melt Pressure sensor VPH135