Welcome to ECOL - Join Free - Sign In
SIPs Modular houses
SIPs Modular houses
Supplier Info
[China Supplier]
Contact Person : Mr. L Alan
Tel : 0086-757-63323690
Fax : 0086-757-85803919
Product Detail
1/ Permanent type of house. 2/ Environmental friendly. 3/ SIPs Modular quick setup. 4/ Low cost house. 5/ Simple design.

iiRii ™ Prefab Modular Houses

Build the Easy Way

 

 

 

Brief introduction

AiiRii ™ Modular H ouses is single storey building with simple in design, walls and roof is made of heat insulation materials, it is a low energy building, and the materials are Environmental friendly. All the sections of the house are made by factory by advance, and then assembled to become a house on construction site, the installation use the basic tool, it take about 4 to 6 people for a week to finish a house about 60 Sq.m. It is a good way to build a large community quickly.

 

AiiRii SuperFix Wall

AiiRii SuperFixboardis a kind of composite board with fireproofing, heat and sound insulation, light features. The inner crosser and special steel materials not only offer powerful rigidity support for the whole construction, but also can prevent the fire spreading effectively. The one block 3000mm×1220mm super large board can apply in the construction with floor height below 3 meters without any integration. The simple installation not only increases efficiency and material utilization rate, but also keeps a clean and quiet installation site, which will not bring rubbish and a mass of dust. As a kind of high quality heat insulation wall, AiiRii SuperFix board applies to Villa, shopping mall, hotel, office, dust-free workshop, apartment and moveable house etc.

AiiRii Paper Honeycomb Core Composite Wall

AiiRii Paper Honeycomb Core Composite wall is made of recyclable paper and Oriented Standard Board through specially developed production equipment. The hexagonal shape of honeycomb core is similar to natural honeycomb constructed by bees.

AiiRii Paper Honeycomb Core Composite Panel is noise-insulated, heat-resistance, fire-protect, anti-shock, light-material, high strength, rust-proof,  and environmental friendly, it is widely used in architecture field with high quality and performance.

AiiRii High-density EPS Core Composite Wall

AiiRii High-density EPS Core Composite wall is made of High-density EPS penal and Oriented Standard Board through specially developed production equipment. The High-density EPS make the wall have good at heat insulation and strenght at structure

AiiRii SuperFixboardis without any asbestos and other baleful material inside. The incombustibility is complying to GB8624-1997A standard. The physics character of core material is very stable. The super heat insulation capability can save the power consumption for cooling and heating of the construction. The panel and core material are combined by PU through pressing process. The PU material physics and chemistry characters can hold stably in long time, which is recognized weather resistance material. The super sound insulation ability ensures quiet and elegance surroundings of the rooms, which can prevent insect and tide, and will not affect by the coagulate water drops or wet weather. The lightest board is 12kg/m2, and it has special join system for quick installation. The board can be reinforced by thicker steel invisibility, which can effectively pull the board and decrease human injury caused by wall dumping at emergency such as earth shock. The board materials are very stable and resist aging, and the useful life is up to 50 years, which is the preferred material for new construction wall.

Specification  

Physics parameter

Dimension:           2440mm/3000mm*1220mm ±2mm

Thickness:           87mm / 120mm ±1mm

Weight:             16~20 Kg/Sqm

Performance parameter

Standard dry shrinkage value         ≤0.46 mm/m

Sound reduction index in air           ≥40 dB

Impact strength                     ≥20times before board cracked

Bending resistance                   ≥3.0 Board deadweight multiple load

Suspend force                       ≥400 N

Fire endurance                       ≥0.25~0.75 Hours

Board combustibility                 Complying to GB8624-1997A standard.

Thermal conductivity                 ≤0. 12~0.019 (W/mK)

Impermeability                       24h No bead no getting damp

Impermeability to water               Water proof

Notice: impact strength is the maximum impact times before board cracked.

Test condition: swing shock with 30KG weight sand bag and 0.5M fall.

 

 

 

Light-steel Structure

AiiRii ™ Modular Houses is made of light-steel structure and cold-formed thin steel as the form, coalescent the board to become a slab-rib system, it make the house more stably.

The columniation is made of square steel tube which is anticorrosive painted, they are holding down to the foundation by bolt. Gird and crossbeam is made of C-shaped section steel, they work with the roof system and the columniation by steel frame connections. It make the house against typhoon and earthquake.

Foundation

According to the construction drawing, build the ground beam with reinforced concrete, gutter should be around, and the ground is level, the site columniation bolted(200mm*200mm) should be go down about 50mm.

 

Roof system

Roof is made by aiirii roof system, it make of roof truss, heat insulation layer, oriented strand board, water-proof layer and asphalt shingle. Finally, we will install the eaves lath and the downspout system. It can load solar panel or solar heater system.

 

Water down spout system

We use PVC , aluminum and antique copper water down spout system.

Electrical System

AiiRii ™ SuperFix Wall are bury the PVC pipe for wire in advance, make hole above the pipe with the tools equipped, then install the outlet box. Switch and outlet are flush-mounted, it is buty and easy to install, all the equipment is according to CE standard, it is safety too.

Ceiling system

There is gypsum plaster ceiling board in living room and bedroom, the gypsum plaster board have capability for heat insulation and sound absorption. In kitchen and bathroom , we use aluminum alloy ceiling board, it is easy to clean , and they are wet fastness.

Sure, we can use the PVC ceiling board for all the house too, for PVC ceiling board is more higher performance-price ratio, and it is more easier to install.

  

Doors and windows

The materials of door can be plywood/ aluminum alloy with glass/steel. The materials of window can be aluminum alloy with glass and PVC with glass, the glass include single glass and double glass, the double glass system has drying agent inside.

 

Wall decorate

External wall: painted/ spray-painted, be sure make expansion joint gap, PVC wall cladding.

Internal wall: painted/ wall paper covering.

 

WaterproofingInstallation Pictures

foundation

Structure & Walls

Interior wall decorate

Finished

AiiRii Modular Houses  

Tel: 0086 757 6332 3690

Fax: 0086 757 8580 0199

Website: www.aiirii.com

www.longweibuilding.cn

Add:Guanbao Road Dalan, Foshang City,

Guangdong Province, China

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v10/752543763_1/SIPs_Modular_houses.jpg' , 'http://i01.i.aliimg.com/photo/v10/752543763_2/SIPs_Modular_houses.jpg' , 'http://i01.i.aliimg.com/photo/v10/752543763_3/SIPs_Modular_houses.jpg' , 'http://i01.i.aliimg.com/photo/v10/752543763_4/SIPs_Modular_houses.jpg' , 'http://i01.i.aliimg.com/photo/v10/752543763_5/SIPs_Modular_houses.jpg' , 'http://i01.i.aliimg.com/photo/v10/752543763_6/SIPs_Modular_houses.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); SIPs Modular houses

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.