PON power meter for Gpon/Bpon/Epon Network with stable laser source 12V power for ONU device 1000 Sets data storage OEM

2.8" TFT-LCD New PON Power meter for Gpon/Bpon /Epon Network

Features

1)2.8 inch TFT-LCD. Brightness, Contrast, Saturation adjustable

2)1310nm, 1490nm, 1550nm power value simultaneous measurement in the PON systems.

3)Dual measurement ports, support test burst mode 1310nm upstream and 1490nm,1550nm downstream.

4)Inner 1310nm/1490nm/1550nm wavelength stable laser source, output power adjustable, stepping-4dBm.

5)Optional 650nm visible laser source, convenient for testing bending, fracture and recognize fiber.

6)UTP cable tester, test the UTP cable connection status and display on the screen.

7)DC12V/1A power output for ONU, and test optical power.

8)Quick, on-site test and measurements of PON signals, anywhere on the network.

9)Three Indicator light shows the fiber state, pass, warn and fail.

10)Relative power test, can set the time, up to 10 groups user defined threshold

11)1000 sets data storage , transmitting data from USB to PC.

12)Data transfer via USB interface, convenient and save time.

13)Set the threshold through software, data upload and wavelength calibrate.

14)Easy to operation, just connect the fiber to read the data.

15)Auto-off function, energy saving.

16)Lithium Ion Polymer Battery supply power output, stable working and low consumption.

17)Professional portable design, with shock absorbing gum case, suitable for using at spot.

Specification

Model	PTM-300C
Calibrating wave length	1310nm	OLT 1490nm	1550nm
	InGaAS
Isolation	1490nm >40dB 1550nm >40dB	1310nm >40dB 1550nm >30dB	1310nm >40dB 1490nm >30dB
Measurement range (dBm)	Burst Model :-35+10 Stable :-40~+10	-50~+10	-45~+20
Spectral Passband(nm)	1310±20	1490±10	1550±10
Connatural uncertainty (dB)	≤ 0.5
Resolution(dB)	0.01
Pass through Insertion Loss (dB)	≤ 1.5
Optical Fiber Model	SM
Connector Type	FC (FC,SC,ST connector)
Other parameter
Stable Laser source	Emitter Type: FP-LD Wavelength: 1310/1490/1550nm Output power: 0dBm power adjustable, step -4dBm Output Frequency (Hz): CW/270/1K/2K Connector type: FC/PC
Visual Fault Locator (optional)	Wavelength: 650nm Output power: optional 5mW/10mW/20mW/30mW Connector type : FC/PC
Threshold setting	10 groups
Data storage	1000sets
Communication port	USB
Power	Lithium Ion Polymer Battery(3000mAh)
Working time	≥20 hours
Operating Temperature	-10°C to 60°C
Humidity	0 to 95%(non-condensing)
Weight	480g
Dimensions (H×W×T)	112×189×47mm

PON optical power meter for Gpon/Bpon/Epon network