Ads by Google
Hydraulic Puller Introduction
1, this hydraulic puller is single bridge structure trailer.
2, the speed of the bull wheels can be varied stepless in both rotation directions. The pull can be controlled and be volume can be read on the dynamometer.
3, the max pull can be adjusted and equipped with overload protection system.
4, spring applied-hydraulic released brake acts automatically in case of hydraulic failure to ensure safety.
5, with self-loading reel winder with automatic level wind,(hand work is also ok) to ensure that the wire can be evenly wound on the pilot wire reel.
6, hydraulic front jack and surge brake for axle.(can be chosen)
7, pre-heat unit to ensure the motor can be easily started in the cold weather.(can be chosen)
| Product No. | 020103 |
| Type | WQT60-IV |
| Technology characteristics | |
| Max pull(kn) | 60 |
| Max continuous pull(kn) | 50 |
| Corresponding speed(km/h) | 2.5 |
| Max pull speed(km/h) | 5 |
| Corresponding pull(kn) | 25 |
| Structure characteristics | |
| Puller groove bottom diameter(mm) | 450 |
| Groove | 7 |
| Max reliable pulling rope diameter(mm) | 18 |
| Max fixed joint diameter(mm) | 50 |
| Overall dimensions(mm) | 3280×1750×2100 |
| Weight(kg) | 3000 |
| Main components | |
| Engine | Cummins water cold |
| Power/rotating speed | 77kw/2500rpm |
| Reducer | Rexroth made in Germany |
| Main hydraulic pump | Rexroth made in Germany |
| Main hydraulic handle | Rexroth made in Germany |
| Hydraulic valve | Atos made in Italy |
| Main hydraulic motor | Rexroth made in Germany |
| Hydraulic meter | Wika made in Germany |
| Pull meter | Fantinelli made in Italy |
| Hydraulic pipeline system | Manuli made in Italy |
| Electrical System(v) | 24 |