FR106 can control several aviation obstruction lights flashing at the same time and fault alarm when any of light failed.
FR109 Control Box can give alarm when light fault, control light flashing frequency and on / off at dusk / dawn, also can be used in street light.
Specifications
DescriptionParameter
Working Voltage | AC110V~AC240V |
Max. alarm output | 9 |
Max. control light | 8 |
Flash rate | 30~60 times/min(adjustable) |
Photocell sensitivity | 70~100Lux(on/off) |
Alarm output | Dry contact |
Control mode | Steady burning/flashing |
Temperature | -30C ~ +70C |
IP grade | IP65 |
Humidity | 10% ~ 95% (no condensing) |
Weight | 10±0.5 Kg |
Material | Enclosure: Cold rolled steel |
Functions & FeaturesControl all the light flashing at the same timeIndividual alarm signal and LED indicator shows corresponding light working stateAlarm output passive signalAutomatic/override manual are available, if in override state, the light will not control by photocellAlarm output when outdoor photosensor faultProduct FileModel: FR109On Stream Date: Aug. 2010Applications: High building, tower, crane, high chimney, lighthouse, high voltage cable tower, oil well, etc.Standard: MH-T 6012-1999; ICAO Annex 14
Aviation Obstruction Light Synchronize Control Box/ Light Board