Application
This product is steel wire armoured well logging cable, to be used in load-bearing operation including oil and gas well logging, perforation, coring and oil well clearing wax, lowering viscosity and concreting, etc.
Operating Requirements
Ø The lowest operating temperature should not be lower than -30 0C;
Ø Temperature for each duration less than 2 hours should not be higher than 150 0C;
Ø Minimum bending radius is 30 times of cable diameter.
Common Types:
S/N | Type | Cores & size | Description |
1 | W3BP-5.6 | 3×0.20 | 3-conductor 5.6mm PP insulation, outer shielding EM cable |
2 | W3FP-5.6 | 3×0.20 | 3-conductor 5.6mm F insulation, outer shielding EM cable |
3 | W3BP-8.0 | 3×0.5 | 3-conductor 8mm PP insulation, outer shielding EM cable |
4 | W3FP-8.0 | 3×0.5 | 3-conductor 8mm F insulation, outer shielding EM cable |
5 | W3BP-11.8 | 3×1.12 | 3-conductor 8mm PP insulation, outer shielding EM cable(perforation only) |
6 | W3FP-11.8 | 3×1.12 | 3-conductor 11.8mm F insulation, outer shielding EM cable(Perforation only) |
Product Name: W3FP-11.8 3×1.12 3-conductor 11.8mm F insulation outer shielding EM cable
Technical Parameters:
1. O.D. of Cable: 11.8mm 2. O.D. of Inner armor: 9.3mm3. Conductor D.C. Resistance: ≤17Ω/km 20°C4. Insulation Resistance: ≥500MΩ•km 20°C5. Insulation Resistance of high temperature: ≥2.5 MΩ•km 6. Pressure A.C. Resistance Test: 1000V 50Hz 5min 7. Capacitance: ≤0.13uF/km 800~1000Hz8. Working temperature: 232°C9. Temperature range: -50~260°C10. Cable breaking strength: 86kN11. Suggested working tension: <40kN12. Minimum sheave diameter: 510mm13. Stretch coefficient: 0.85m/km/5kN14. The length of cable delivery is between 3000 meters and 8000 meters (between 9843ft and 26248ft) per reel, the length tolerance is between 2% and 3%. The length of cables can be as per customers’ requirements.