copper conductor round or flat shape SE cable service entrance cable type SE, in flat or round shape concentric conductor

copper conductor round or flat shape SE cable,

Service Entrance Cable, Type SE, In flat and In round cable, 600 Volt

Concentric conductor with 100% and non 100% coverage

Individual Conductors Rated XHHW-2 or THW

Jacket and Individual Conductors Sunlight Resistant

 

APPLICATIONS

These requirements cover Type USE and USE-2 (below-ground) and Type SE (above-ground) power cables for installation in accordance with Article 338 and other applicable parts of the National Electrical Code (NEC). These cables are for the service-entrance and other (NEC) uses described in 1.4 – 1.8. In a multiple-conductor cable that is other than submersible-pump cable and does not have a grounding conductor it is appropriate to have one circuit conductor without insulation. It is also appropriate for a submersible pump cable to have a grounding conductor and for Type USE and USE-2 cables to have an insulated grounding conductor. Each insulated conductor in these cables is rated for 600 V. Type USE cable has thermoset insulation, except for the HDPE portion of HDPE-over-XLPE insulation where used for single-conductor Type USE cable. Type SE cable has thermoset or thermoplastic insulation.

SPECIFICATIONS

Type SE cable meets or exceeds UL Standard 44 for XHHW-2 conductors or UL 83 for THW conductors, UL Standard 854.

  

CONSTRUCTION

Type SE cable is constructed with sunlight resistant Type XHHW-2 conductors or Type THW conductors. Copper conductors are annealed (soft) copper. Cable assembly plus reinforcement tape are jacketed with sunlight resistant thermoset or thermoplastic material, Available as 1 conductor with a concentric ground, 2 conductor with a round and flat or concentric round, or 3 conductor with a bare ground. SE cable is jacketed with gray sunlight resistant thermoset or thermoplastic material

TYPE

Single conductor type round without 100% coverage

Single conductor type round with 100% coverage

Two conductor without concentric conductor

Three conductor without concentric conductor

Two conductor type round concentric conductor without 100% coverage

Two conductor type flat concentric conductor with inner covered without 100% coverage

Three conductor concentric conductor without 100% coverage

 

Other special characteristics: design and manufacture according to custmers' request

( function(){ var aBigImageSrc = [ 'http://i00.i.aliimg.com/photo/v1/709305290_1/6AWG_8AWG_copper_conductor_round_or_flat.jpg' , 'http://i00.i.aliimg.com/photo/v1/709305290_2/6AWG_8AWG_copper_conductor_round_or_flat.jpg' , 'http://i00.i.aliimg.com/photo/v1/709305290_3/6AWG_8AWG_copper_conductor_round_or_flat.jpg' , 'http://i00.i.aliimg.com/photo/v1/709305290_4/6AWG_8AWG_copper_conductor_round_or_flat.jpg' , 'http://i00.i.aliimg.com/photo/v1/709305290_5/6AWG_8AWG_copper_conductor_round_or_flat.jpg' , 'http://i00.i.aliimg.com/photo/v1/709305290_6/6AWG_8AWG_copper_conductor_round_or_flat.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); 6AWG 8AWG copper conductor round or flat shape SE cable