PP monofilament fiber(PP mini-fiber) 1)Material:100% polypropylene 2)Length:3-50mm 3)Density:0.91g/cm3 4)Type:Monofilament

PP monofilament fiber(PP mini-fiber)

Specifications

Raw Material	Polypropylene	Crack Elongation	20%±5%
Type	Monofilament	Density	0.91±0.01g/cm3
Fiber Dia	0.02-0.05±0.005mm	Melting Point	160-170°c
Tensile Strength	≥450MPa	Resistance to Acid,Alkali	Strong
Size	3-50mm	Water Absorbency	No

PP monofilament is also named as pp mini-fiber,is produced by referring foreigh advanced technology for fiber-spinning,modified by adding functional additive and special surface-treating.Mixing into cement concrete,it has many advantages such as good dispersing,better water affinity,and strong linking force.It is suited to reinforce and crack-resist to every kinds of cement concrete and mortar,specially used in engineering of building surface.floor,wall,etc.

Applications

Be suitable for the water-proof layer,floor,inner&outer wall of industrial and civil construction.

Increase cracking resistance on the surface of industrial workshop,warehouse and parking lot.

Increase cracking &seepage resistance of the ground in natatorium,swimming pool,pond and ditch.

Highway,brige and other roads.

Applying Instruction

Length:for mortar:<12mm;for concrete:>12mm

Compounding Amount:for resisting the common cracks on surface,0.9kg/m3 fibers to cement mortar are enough.

Strring Requirements:the proportion of cement,sand and aggregate is no need to be changed.Put cement,aggregate,additive and fiber together,then stir after adding enough water and time for stirring can be prolonged for 2-3 minutes in order to make the compound mix completely.Also it can be mixed even with cement and other aggregates in advance,stirring by adding water at worksite before constructing.

Package:common 0.9 or 1kg per bag.May be modified with customer’s requirements.

PP monofilament fiber(PP mini-fiber)