[Product Outline] Active thickener JL-TB-A could be applied in active dye printing, while common active dye printing makes use of sodium alginate as traditional material, and beating needs sets of equipment with a long time, high cost, what’s more, it is non-environmentally protective with low tinctorial yield, inferior brilliance, and no brightness in fineness. The appearance of active thickener JL-TB-A could solve above problems, and the color brightness could be raised by about 15%, besides, it uses conveniently, and you can as beat as use. The cost is low and it could be used together with sodium alginate. The sewage after rinsing could be degraded, and it is apt for the disposal of sewage environmental protection and reducing the cost of printing and dyeing industry. The thickening degree could be adjusted and it is used safe and conveniently.

[Technical Index]  Appearance: milky white ropy liquid    

            PH:6.8-7.3      

Thickening Viscosity:10% thickening agent +186% water +

4% saleratus 53000cp.s

(NDT-1 type rotary viscosimeter: under room temperature 4# rotor 6roll/min)

[Application Referential Formula]

1.

 Beating Techniques: add JL-TB-A into3% alga plasm and stir them. With certain amount of water to dissolve reserve salt, carbamide and dye, then adding them into printing plasm, starting beating machine, at last, adding certain amount of saleratus, beating to even state is OK.

2.

 Beating Techniques: Make certain amount of JL-TB-A and water as plasm for ready application. With certain amount of water to dissolve reserve salt, carbamide and dye, then adding them into printing plasm, starting beating machine, at last, adding certain amount of saleratus, proceeding to beating to even state is OK.