PTFE Sheet 1.is made from PTFE resin and prepared by compression molding and skiving 2.It has excellent corrosive resistance,~

PTFE sheet is made from PTFE resin and prepared by compression molding and skiving. It has excellent corrosive resistance, no aging, non-sticking property and lowest friction coefficient and can be used as corrosive resistant lining, support block, lathe guide and electric component at the temperature of -180~+260. It conforms to the professional standard QB/T 3625-99.

  

Specification

                                                           Unit:mm

	Thickness	Length & Width
Molded sheet	3100mm	1200mm×1200mmMax
Skived sheet	0.54mm	Width≤1800mm Length by roll

Note: Customers request negotiable.  

Main Properties

  

Item	Unit	Value
		SFB-1	SFB-2	SFB-3
Gravity		2.10~2.30	2.10~2.30	2.10~2.30
Tensile Strength	MPa	≥15	≥15	≥15
Elongation @ Break	%	≥150	≥150	≥30
Dielectric Strength	kV/mm	10

Note: SFB-1 is used as electrical insulation material;           SFB-2 is used as gasket, sealing and lubricant material;          SFB-3 is used as membrane and visual window material in corrosive media.