Extruded PTFE Rod/Teflon Rod/Teflon Bar
Features
there are three kinds of PTFE rods to offer.One is manufactured by paste extruding method in the diameter from 2 to 4mm and the other is made by ram extruding method in the diameter from 5 to 120mm;rods over the diameter 55 to 300mm are manufactured bu moulding. PTFE is the most chemical-resistant and the best dielectric of all known plastics.It is not aging and binding.It can be used from-180°C-+260°C under no burthen circumstances .PTFE has the lowest coefficient of friction of all known solid materials .Types and specifications
TYPES | Diameter(mm) | Length(mm) |
pressed rod | 2~4 | produced under requirements |
extruded rod | 5~120 | 500~3000 |
die pressed rod | 55~300 | 100~300 |
Main properties
Properties | unit | Result |
Apparent dens ity | g/cm 3 | 2.10~2.30 |
Tensile strength(min) | MPa | 14.0 |
Crack elongation(min) | % | 140 |
Note : When the diameter of rod is larger than 16mm,only test Apparent density .
Applications
Electrical insulation,seal,anti-sticking materials .
About our factory:
(1).Factory advantange: Professional PTFE manufacture.
(2). Maily products:
PTFE moulding sheet, PTFE skived sheet, PTFE extrusion rod,PTFE moulding rod, plastic ptfe rod , 100% PTFE Rod , teflon rod .100% virgin KC ptfe rod ,100% virgin ptfe round bar
PTFE pipe, PTFE film, HDPE rod, HDPE sheet, POM, PVC and so on.
(3). Standard: ISO9001
Certification: SGS, ISO9001:2008
PTFE Rod
1.Trustworthy quality
2.Low minimum order quantity with competitive prices.
3.Good after sale services.
4.100% virgin PTFE resin and recycled materials available
5.Our PTFE rod comes with flat and tidy surface without defects or crevices.
6.We can also produce according to drawings provided by customers.