MoldFlow Analysis Reports

Product Information

Part Name   : A7230Reported By:  cxReport Date : 2007/11/07Volume:         412.24Part Weight: 322.g Analytical content 1. Plastic Material Introduction 2.Product Model Introduction3.Analysis Indication 4.Feed and Cooling System Design & Processing Condition 5.Analysis Results6.Conclusions & Suggestions   Material introduction   Product model introduction    Fill Time  Flow Front Temperature      Volumetric Shrinkage    Sink Index    Sink mark depth   Weld Lines   Air Traps     Coolant Temp     Circuit Flow Rate   Time to Freeze    The all deflection is shown      Temp (part surface in cavity& core)      Frozen Layer Fraction  Conclusions&SuggestionsConclusions: ØThe part will has some degree of sink mark opposite ribs. ØPay more attention to vent in marked regions.   Suggestions: ØDecrease the thickness of rib base to remove sink mark. ØWe suggests add more vents to improve the warp.