Plastic Robot Hand (SS750V)
Rotary robot arm
Driven by pneumatic,Single arm,Single stage
Handy controller:
SS series offers take-times available for sprue separation and parts removal. Self-lubricating pneumatic drive system affords low maintenance, exceptional stability and reliability. This series of robots are constructed on modular principle to ensure high precision and lightness. The main arm rides vertically on a linear slide-rail and slides horizontally (crosswise) on two roller guide-ways, no maintenance is required and smooth running and the elimination of play/slack is ensured. Travel cushions on the vertical axis minimize vibration and ensure smooth deceleration; hydraulic shock absorbers are fitted on the crosswise axis for efficient damping.
General Specification
Power Source | Power Capacity(KVA) | Working Pressure | Max. Allowed Pressure | Driven System | Control System |
AC220v±10v 50/60HZ | 0.2 | 5kgf / cm2 0.49Mpa | 8kgf / cm2 0.8Mpa | Pneumatic Cylinder | GA28 |
Main Specification
Model | SS350V | SS450V | SS550V/WV | SS650V/WV | SS750WV | SS850WV | SS950WV |
Recommended IMM(ton) | 15-30 | 30-60 | 50-100 | 50-150 | 150-200 | 200-280 | 200-280 |
Vertical Stroke(mm) | 350 | 450 | 550 | 650 | 750 | 850 | 950 |
Crosswise Stroke(mm) | 75 | 120 | 200 | ||||
Swing Angle(degree) | 60-90 | 60-90 | 60-90 | ||||
Dry Take Out Time(sec) | 0.6 | 0.7 | 0.8 | 0.9 | 1 | 1.2 | 1.4 |
Max. loading(kg) | 2.5 | 3 | 3 | ||||
Air Consumption(NI/cycle) | 1.5 | 1.5 | 2.2 | 2.2 | 2.5 | 2.8 | 3 |
Net Weight (kg) | 30 | 31 | 35/47 | 36/48 | 49 | 52 | 53 |
Gross Weight(kg) |
|
|
|
|
|
|
|
Product Size(mm) |
|
|
|
|
|
|
|
Package Size(mm) |
|
|
|
|
|
|
|
W: telescopic type V: with vacuum generator and vacuum jig (these model require additional air consumption of 10 nl/cycle)