Servo Horizontal Plastic Injection Machine FD Series:
Horizontal direct hydraulic clamp injection molding machines
Hydraulic clamping makes high production level
Dual injection cylinder design can be operated very stableFD-120A injection machine:
Hydraulic clamping design prevents platen deformation. The clamping force is distributed evenly,the product made inside the mold is accurate and stable.
NO abrasion on pins and bushes, no lubrication needed and no oil contamination, ensure easy maintenance and long working life .
Space between tie-bars and opening stroke are larger than others, suitable for the bigger molds.
Injection moulding machine specifications:
MODE | Unit | FD-120A | |||
Injection Unit | Screw diameter | mm | 36 | 40 | 45 |
Screw L/D ratio | L/D | 22.2 | 20 | 17.8 | |
Theoretical shot volume | cm3 | 188 | 232 | 294 | |
Maximum shot weight (PS) | g | 173 | 213 | 270 | |
oz | 6.1 | 7.6 | 9.6 | ||
Maximum injection pressure | kg/cm2 | 2571 | 2083 | 1645 | |
Clamping Unit | Injection rate | cm3/sec | 109 | 135 | 170 |
Plasticizing capacity (PS) | kg/hr | 46 | 56 | 68 | |
Screw torque & speed (HT/LS) | N.m/rpm | 882/317 | |||
Screw torque & speed (LT/HS) | N.m/rpm | 770/354 | |||
Clamping force | ton | 120 | |||
Opening stroke | mm | 560 | |||
Minimum mold thickness | mm | 200 | |||
Open daylight | mm | 760 | |||
Space between tie-bars | mm | 425×425 | |||
Others | Plate dimension | mm | 620×620 | ||
Ejector stroke | mm | 150 | |||
Ejector force | ton | 3.9 | |||
Pump/motor power | Hp(KW) | 20(15) | |||
Hydraulic system pressure | kg/cm2 | 140 | |||
Heater capacity | KW | 8.8 | |||
Oil tank capacity | L | 480 | |||
Machine dimension (Approx.) | m | 5.1×1.0×1.6 | |||
Machine weight (Approx.) | ton | 4.5 |
Servo Plastic Injection Molding Machine Price