The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material.

Principle:

The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material. Then it is cut through high-speed crusher and become uniform granules.

Features

The machine adapts horizontal cylinder structure. Its structure is reasonable; Use air filled seal shaft to drive. When washing, it can be changed to water; Use fluidization to Granulate and the granule is near ball. Its flow is good; Compared the traditional process, 25% of adhesive can be reduced and the laying time can be shorted; The time of traditional process, minutes and the time of granulating is 1~4 minutes. Compared with the traditional process, 4~5 times of efficiency is raised; In the same sealed container, drying mixing, humidity mixing and granulating can be finished. It is in conformity with the requirements of GMP; The whole operation has strict safe and protective measures.

Technical Parameters

item		specification
name	unit	10	50	150	200	250	300	400	600
capacity	L	10	50	150	200	250	300	400	600
output	kg/batch	3	15	50	80	100	130	200	280
admix speed	r.p.m	300/600	200/400	180/270	180/270	180/270	140/220	106/155	80/120
admix power	kw	1.5/2.2	4/5.5	6.5/8	9/11	9/11	13/16	18.5/22	22/30
incise speed	r.p.m	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000	1500-3000
incise power	kw	0.85/1.1	1.3/1.8	2.4/3	4.5/5.5	4.5/5.5	4.5/5.5	6.5/8	9/11
pressure air amount	m3/min	0.6	0.6	0.9	0.9	0.9	1.1	1.5	1.8

High Speed Mixing Granulator(jinling)