The unit is mainly used for conducting wires coated with PTFE paste.It is made up of mixing divice, pre-forming machine, pressing, sintering furnace host, traction machine, receiving machine and outer diameter measuring instrument, the main control cabinet and the console.According to the main structure and layout, there are vertical and horizontal engine.

PTFE pipe paste machine is the derivative products, the difference is that the host barreled raw materials is from top to bottom launch .

Main technical parameters

NO.                         Designation

1                                     Push motor                                               35T

2                                   Capstan motor                                          5.0kw

3                                    Pay off motor                                           5.0kw

4                                     Take-up motor                                        5.0kw

5                                    Sintering furnace length                            15m

6                                    Sintering furnace power                            45kw     

7                                    Speed of the production line                   0~60M/min

8                                     Unit total height                                       12000mm

9                          Sintering furnace temperature (400 °C)             <30minØ

10                          Implementation of speed (uplink)                    10~50 mm/min

11                               Reset speed (downlink)                              ≥500 mm/min

PTFE 1800 type vertical paste extruder