blowing plastic machinery,blow mold machine,blow plastic machinery Capacity:12L; Screw diameter:90mm; Siemens PLC Controll, The 12L-16L double station blowing plastic machinery,blow mold machine,blow plastic machinery is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of DHD-12LIIand DHD-16LII. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 16L, and its production capacity is 60 to 70% more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production. Setting:Clamping------------Double station+Hight-precision guide+large arm cylinder axle  Extrusion system--Hard gear surface reducer+Japan inverter  Die system----------Central-incoming extrusion die with special steel Hydraulic system--Japan hydraulic valve seal and proportional control Control system----Japan PLC+Imported HMI+PLC automatic

Specification		DHD-12LII	DHD-16LII
Material		PEPP	PEPP
Max.container capacity	L	12	16
Number of die	set	12346	12346
Machine Dimension	m	4.1×2.5×3	4.5×2.7×3.1
Total weight	ton	10	13
Accumulator head		DHD-12LII	DHD-16LII
Number of die heating	zone	3	4
Power of die heating	KW	6-7	6-7
Max die-pin diameter	mm	140	140
Center distance of twin-die	mm	240	260
Center distance of tri-die	mm	160	180
Center distance of four-die	mm	120	130
Center distance of six-die	mm	85	90
Clamping Unit		DHD-12LII	DHD-16LII
Clamping force	KN	110	155
platen opening stroke	mm	219-600	219-620
platen size	mm	460×500	520×480
Max mould size	mm	560×500	600×480
Mould thickness	mm	220-380	220-380
Extruder Unit		DHD-12LII	DHD-16LII
Screw diameter	mm	90	90
Screw L/D ratio	L/D	25:1	25:1
Extruding Volume	Kg/hr	130-160	130-160
Number of heating zone	zone	4	4
Extruder heating power	KW	8.2-9.3	8.2-9.3
Extruder driving power	KW	37-45	37-45
Power		DHD-12LII	DHD-16LII
Oil pump drive power	KW	15	15
Fan power for screw	KW	0.6	0.6
Total power	KW	67	67
Air pressure	Mpa	0.6	0.6
Air consumption	m	1.0	1.0
Average energy consumption	KW	35	38

Blowing plastic machinery and blow mold plastic machinery