plastic hopper dryer for injection machine Loading capacity: 12-1200kg Stainless steel machine material LED display status

plastic hopper dryer for injection machine

GHD series hopper dryers adopt hot air down-blowing design and use stainless steel made material hopper to avoid contamination. With this design, they are also ideally suitable for use with honeycomb dehumidifiers to dry engineering plastics. There are 18 models available, ranging from 12 to 12,00 kgs.

Standard configuration:

 

1) Digital P.I.D. temperature control .

2) Overheat protection to ensure reliable operation.

3) Unique design of downblow air pipe can spread hot air evenly, keeping plastics ary and temperature. stable to raise drying efficiency.

4) Models GHD-50kg and above have material clearance door to make the clean more convenient and effective.

5) Floor stand is standard equipment for GHD-1000kg and models above.

Accessory option:

1) Cyclone dust separator, magnetic base and blower inlet filter are optional.

2) Hot air recycler, suction box, hopper magnetic, N type floor stand and storage hopper are optional.

3) Safety protective ladder is optional for GHD-1000kg and models above.

Working Principle:

In the drying process, hot air with constant temperature is blowed by a blower into a two-layer insulated hopper to dry the materials. Moisture will be separated out and taken away by hot air, thus to gain a satisfied drying effect.

Specifications of hopper dryer for injection machine

Model	Loading Capacity (kg)	Heater Power (kW)	Blower (kW)	Dimensions (mm) H×W×D	Floor Stand (mm) H1×W1×D1	Whole Height H2 (mm)	Weight (kg)
GHD-12	12	2.2	120	730×575×325	790×450×550	1260	18
GHD-25	25	3	120	760×640×390	790×450×550	1295	25
GHD-50	50	3.9	120	940×722×475	840×730×560	1465	50
GHD-75	75	3.9	120	1210×722×475	840×730×560	1735	60
GHD-100	100	6	180	1225×822×575	920×652×795	1825	90
GHD-150	150	6	180	1505×822×575	920×652×795	2105	100
GHD-200	200	12	250	1450×945×695	970×790×930	2085	130
GHD-300	300	12	250	1850×945×695	970×790×930	2435	160
GHD-400	400	18	550	1820×1170×915	1130×1000×1200	2470	200
GHD-500	500	18	550	2100×1170×915	1130×1000×1200	2780	220
GHD-600	600	18	550	2070×1410×1050	2760×1130×1130	2730	250
GHD-800	800	18	550	3350×1410×1050	3190×1145×1145	3160	376
GHD-1000	1000	32	1100	2950×1650×1250	3470×1340×1340	3470	495
GHD-1200	1200	32	1100	3350×1650×1250	3870×1340×1340	3870	568

Optional:

Europeanize plastic hopper dryer for injection machine (12-1200kg)