Smart Card Module Personalized Data Writer 1.Writing the sequential requirement data 2. Engravethe card body with two laser

Smart Card Module Personalized Data Writer YLG-E

For watching the video clip of this machine, please visit our official website:

http://www.tj-lk.cn

Smart card personalized data writer YLG-E is applicable for writing the sequential requirement data such as smart card personalized data on both 2-chip card and 1-chip card, and it can also mark or engrave the card body with two laser units. The equipment is developed with module design

Basic Configuration

32 programming stations (YLD-A1.0 Reader);YL Intelligence control system;Double input and output Magazines 4*500 ; 1 defective Card Station;1 flip before Laser Marking Station;1 Turning pan with 6 buffers for Re-arrangement (for re-writing cards );2 sets of laser units with cooling system and air clean system 2 Industry Computers (motion control and Data control)1 TPLINK (24 interface)

Speed and downloading time (for 2-chip card)

X axis is time,Y axis is speed,the time at inflexion is 8.8s. when the downloading time is 24.8s,the speed is 2000 cards/h.

Speed and laser marking time (for 2-chip card)

X axis is time,Y axis is speed,the time at inflexion is 0.4s,when the marking time is 1.6s,the speed is over 1800 cards/h.

Technical parameters:

Device Dimension(L×W×H: 3.45m×1.0m×1.75mWeight: about 800kgPower supply: 220V(-5%~+10%),50Hz             3Kw(Main Device),3.6Kw(Laser)Power duty:   About 30%;Air supply    0.5Mpa   10L/min

Smart Card Module Personalized Data Writer (card personalization,card personalizing ,IC card personalization,smart card person )