cutting size is 86mm*54mm

Steps:1. Design in computer, you may use CorelDraw, Photoshop, Illustrator, Freehand, etc. software to make design in your computer 2. Put the blank printable overlay/film into the inkjet printer , reverse-print (Note: when you put the printable overlay/film into the inkjet printer, please put right side for print, DON’T PUT WRONG SIDE!) You may print two films, one as front side of the card, one as backside. 3. After printing, let the printed film dry around 5-10 minutes, then, remove the protection film from the both sides of the core PVC sheet, put one printed film on one side of the PVC sheet and put the other

 printed film onto the other side of the PVC sheet, then, put them all into the pouch laminator for lamination. You may set the temperature at 130-140C, to get a better laminating result, you may laminate twice. 4. After laminating, use a cutter to cut the laminated sheet into two half sheets (two pieces of sheet with  size of 100x300mm)5. Put the sheet into manual puncher for punching6. After punching, you will get a final cards.