Film Extruder
1.L/HDPE as material
2. EPC device by photoeclectric control
3. IBC (Internal Bubble Cooling)
This machine set is used for producing LDPE or LLDPE stretch film, which is equipped with single screw, the extruded stretch film is both sides adhesive. If the machine adopts double screws, and the two hoppers should use different types of material, then one side of the extruded stretch film is adhesive and the other side is normal. It is widely used for packing architecture and hardware parts, etc. 1. Screw and cylinder are all made of 38 CrMoAlA alloy and treated by nitrogen. It has an advantage of corrosion resistance and endurance, etc.2. The cooling device adopts cycle water cooling; provide the best transparent effect of stretch film.3. Take-up equipment adopts friction type rewinding, and equipment with edge correcting device to ensure the quality.
Model | DFS-50 | DSF-55 |
Screw Diameter | Φ50mm | φ55mm |
L/D | 30:1 | 30:1 |
Rational speed of screw stem | 10-120rpm | 10-120rpm |
Finished Film Width | 200-500mm | 200-500mm |
Finished Film Thickness | 0.008-0.04mm | 0.008-0.04mm |
Main Motor Power | 11kw | 15kw |
Heating power | 15kw | 20KW |
Water Consumption | 0.5m3/h | 0.5m3/h |
Machine Weight | 3T | 4T |
Overall Dimensions(L*W*H) | 5600*1500*1800mm | 6000*1500*2500mm |
Stretch Film Making Machine