Plastic Injection Molding Machine :
ITEM | UNIT | DATA | |||
InjectionUnit | Screw Diameter | mm | 40 | 45 | 48 |
Screw L/D Ratio | L/D | 22.5 | 20 | 18.8 | |
Injection Volume | cm3 | 245 | 310 | 353 | |
Shot Weight | g | 223 | 282 | 321 | |
Injection Pressure | Mpa | 202 | 160 | 140 | |
ClampingUnit | Clamping Force | KN | 1600 | ||
Opening Stroke | mm | 400 | |||
Mould Thickness(Min-Max) | mm | 180-450 | |||
Space Between Tie-Bars | mm | 450×410 | |||
Ejector Stroke | mm | 100 | |||
General | Motor Power | KW | 15 | ||
Heater | KW | 10 | |||
Pump Pressure | Mpa | 16 | |||
Machine Dimension | m | 4.6×1.4×1.9 | |||
Machine Weight | T | 4.2 | |||
Mould Orientation Ring Diameter | mm | Φ125 | |||
Nozzle Radius | mm | SR15 |
Components | Brand/Country |
Hydraulic motor | Intermot or Cazoni/USA |
Hydraulic pump | Tokimec /Japan or Vickers /U.S.A |
Directional valve | Vickers /U.S.A |
Proportional valve | Yuken /Taiwan |
Orbit hydraulic motor | EATON /U.S.A |
Seal and "o" ring | Valqua /Japan |
Hydraulic hose | LAFAGOMMA /Italy or AWROQUIP /U.S.A |
Pressure meter | VDO /Germany |
Contactor | Schneider /France |
Fuse holder or phase breaker | Schneider /France |
Limit switch | Omron /Japan or Telemecanique /France |
Air breaker | Schneider /France or Fuji /Japan |
Position Transducer | Gefran /Italy |
Sensor | Omron /Japan |
Computer | Techmation /Taiwan (PC based,color LCD) |
Clamping Platen | QT450 /China (precise casting) |
Tie bar | Cr40(after special heat treatment)/China |
Screw and Barrel | 38CrMoALA /China |
Remark: components changed due to technology and supplier without pre-notice |
Plastic Injection Molding Machine