MD70Rx3 double station blow molding machine (EBM) suitable for making 800ml,1L bottles with PP/PE

MingDa MD70R series full-automatic blow molding machines suitable for making 5ml~5L bottles with all kinds of plastics except PET.

MingDa blow moldingmachine equipped with Siemens PLC,Taiwan ABBA linear guider,inverter...with optimized hydraulic oil loop design,offers you a stable,safe,high efficiency,energy saving solutions.

Our extrusion blow molding machine[blow moulding machine, blowmolding machines, blow moulder]  offers multi-solutions of dieheads according to customer's requirement for production,single layer,multi-layer,view line of bottles can be served on request.

MingDa extrusion blow molding machine model MD70Rx3:

 1.Screw diameter 70mm,double station,three dieheads,single layer

 2.Center to center distance: 90mm suitable for making 800ml bottles

                                          100mm/120mm for making 1L bottles

3.Plastic:PP/PE

MingDa full automatic blow molding machine technical parameters:

System	Item	Unit	Basic paramters
Basic Spec	Plastic fit for		PE  PP  PVC  PA
	Max hollow product volume	L	5
	Diehead amount	set	1,2,3,4,5,6
	Size(LxWxH)	M	3.56x2.46x2.36
	Weight	ton	4.5
Clamping System	Clamping force	kN	70
	Template distance	mm	180-480
	Template stroke	mm	300
	Max template size(WxH)	mm	400x420
	Mould thickness	mm	185-250
Extrusion System	Screw Dia	mm	70
	Screw L/D ratio	L/D	24
	Plasticizing capacity (HDPE)	Kg/h	65
	Screw heating zone	zone	3
	Screw heating power	kW	14.5
	Screw fans power	kW	0.42
	Extrusion motors power	kW	18.5
Die head	Diehead heating zone	zone	2
	Diehead heating power	kW	6.5
	Sprue-die dia(max)	mm	130
Power	General power	kW	42.68
	Oil-pump motor power	kW	9.5
	Air pressure	Mpa	0.6-0.8
	Average power	kW	23
	Compressed air dosage	m3min	0.4
	Cooling water dosage	L/min	60

MingDa Fully-automatic extrusion blow molding machine(MD70Rx3)