Mitsubishl electrical control panel ,
Hydraulic system
Extrusion system
Basic Equipment
Clamping system | Fixed mold open-closing system |
Extrusion system | + Hard gear surface reducer+Japan inverter |
Die system | Accumulator head |
Hydraulic system | + Japan hydraulic valve,seal and proportional control |
Control system | PLC+()+PLC Japan PLC+Human-machine interface+PLCautomatic temperature control model |
Specifications | FA-65 | FA-80 | FA-90 |
Material | | PE,PP,ABS... | PE,PP,ABS... | PE,PP,ABS... |
Max container capacity | L | 30 | 50 | 60 |
() Output(dry Cycle) | pc\hr | 400 | 360 | 360 |
(XX) Overall Dimension(LxWxH) | M | 4x1.65x1.1 | 4x1.9x1.2 | 5.3x2.8x4 |
Total weight | ton | 9 | 12 | 13 |
Clamping Unit | FA-65 | FA-80 | FA-90 |
Clamping force | kn | 120 | 200 | 300 |
Platen opening stroke | mm | 300-600 | 400-900 | 450-1050 |
Platen size | mm | 800x950 | 880x800 | 1000x1160 |
(x) Max mould size(W x H) | mm | 500x600 | 600x1000 | 700x1100 |
Mould thickness | mm | 200-300 | 350-510 | 400-600 |
Power | FA-65 | FA-80 | FA-90 |
Max drive | kw | 45 | 70 | 75 |
Toal power | kw | 55 | 82 | 89 |
Fan power for screw | kw | 0.5 | 0.5 | 0.5 |
Air pressure | Mpa | 0.7 | 1 | 1 |
Air consumption | m3/min | 0.5 | 0.8 | 0.8 |
Average energy consumption | kw | 30 | 35 | 38 |
Extruder unit | FA-65 | FA-80 | FA-90 |
Screw diameter | mm | 65 | 80 | 90 |
Screw L/D ratio | L/D | 24 | 28 | 28 |
Plasticising capacity | Kg/hr | 80 | 110 | 120 |
Number of heating zone | zone | 4 | 4 | 4 |
Extruder heating power | KW | 18 | 20 | 22 |
Extruder driving power | kw | 18.5 | 22 | 30 |
Accumulator head | FA-65 | FA-80 | FA-90 |
Number of heating zone | zone | 4 | 4 | 4 |
Power of die heating | kw | 13.2 | 21.3 | 25.8 |
Max die-pin diameter | mm | 200 | 300 | 350 |
Accumulator capacity | L | 4 | 6 | 7.5 |
fa-65/fa-80/fa-90 series automatic blow moulding machine