Ads by Google
Extrusion plastic machine (QCM-55) (Double Station)
QCM-55 series machine adapt the three guide liner axis,powerful mould locking system,make sure that the product good finishing under pressure.SEIMENS interface touch screen including:craftwork seting,adjusting,monitor,and warming system and so on,DEIMENS editable PLC programme for different kind of product.Famous brand electric components which have CE,CCCcertificate;Japan YUKEN flow and pressure proportional control system make sure that the action stablely,orientation exactly;frequency transducer keep the material pipe equal,and stable.
special configure30 digital point Moog parison controller systemproduct leak testing deviceproduct deflashing and transportant system.cusomer's product request.Parametric Technology
| Max Container capacity(L) | L | 2 |
| Screw Diameter(mm) | mm | 55 |
| Screw L/D Ratio(l/d) | L/D | 22~24 |
| Plasticizing Capacity | Kg | 45 |
| Extruder Driving Power | Kw | 11 |
| Number of Screw Heating Zone | Zone | 3 |
| Scerw Heating Power | Kw | 6 |
| Number of Die Heating Zone | Zone | 2 |
| Power of Die Heating | Kw | 2.4 |
| MAX die Diameter | mm | 90 |
| Clamping Force | KN | 30 |
| Oil Pump Drivepower | Kw | 5.5 |
| Servo Oil Pump Driving Power | Kw | 4 |
| MAX Power Consumption | Kw | 26.1~30.1 |
| Airpresssure | Mpa | 0.6 |
| Air consumption | m3/min | 0.4 |
| Water Consumption | m3/min | 1.6 |
| Machine Dimension | (LxWxH)mm | 2.6x1.9x2.2 |
| Total Weight MAX | TON | 3.6 |