TCB60II-4D EXTRUSION BLOW MOLDING MACHINE
Extrusion system can be applicable to various of raw material, plasticizing capability must be perfect and output with high performance, transducer adjust speed, collect temperature-control signals and prevent the screw from cold startingPower driven by AC motor & transfer the power by reducer.Reducer feature: hard-teeth, low noise and wear-resistant speed reducer. Lubricated by gear oil HD-140.Heating zone was controlled by 4 zones. The technical parameter of TCB60II-4DTechnical Parameters |
|
|
Specifications |
| TCB60II-4D series |
Suitable Material |
| PE、PP、PVC、PA. |
Max container capacity | L | 4X1 |
Number of die heads | set | 4 |
Output(dry Cycle) | pc/hr | 800x4 |
Machine Dimension(L×W×H) | M | 3.0x2.2x2.8 |
Total weigh | ton | 5.5 |
|
|
|
Clamping Unit |
| TCB60II-4D series |
Clamping force | KN | 40 |
Platen opening stroke | mm | 138-368 |
Platen size | mm | 338x450 |
Max mould size(W×H) | mm | 400x400 |
Mould thickness | mm | 140-210 |
|
|
|
Power |
| TCB60II-4D series |
Max drive | KW | 20.5 |
Total power | KW | 33.9 |
Fan power for screw | KW | 0.3 |
Air pressure | Mpa | 0.7 |
Air consumption | m³/min | 0.6 |
Average energy consumption | KW | 16.5 |
|
|
|
Extruder unit |
| TCB60II-4D series |
Screw diameter | mm | 60 |
Screw L/D ratio | L/D | 24 |
Plasticizing capacity | Kg/hr | 60 |
Number of heating zone | zone | 3 |
Extruder heating power | KW | 8.8 |
Extruder driving power | KW | 15 |
|
|
|
Die head |
| TCB60II-4D series |
Number of heating zone | zone | 3…5 |
Power of die heating | KW | 4.6 |
Max die-pin diameter | mm | 30 |
Center distance of tetra-die | mm | 60--85 |