Ads by Google
blow machine
1.The machine controlled by advanced siemens PLC system,easy for operation,automatic trouble alarming,working in reliable with hing degree in automation
2.Frequency inverter motor driving,can meet the requirment of the rotation speed variation of screw rod accurately,and with consumption
3.Optimized hydraulic oil line design,power-saving,quick actions,stable as well as overprice cost performance
4.The mould clamp mechanism uses directiy-press synchronous type four guide-poles large beam-arm circular colun shaft,double station,quick mould moving with fine quiet running performance.
5.Can be equipped with single die head,two die heads,four die heads,two tiers head,two tiers with transparent line die head as well as servo-type thickwall controlled die head,can meet various requirements for product.
Main Parameters | Unit | RX70D-5L |
Max. Product Volume | (L) | 5 |
Dry Cycle | (pcs/h) | 700×2 |
Screw Diameter | (mm) | 70 |
Screw L/D Ratio | (L/D) | 24 |
Screw Drive Power | (KW) | 22 |
Screw heating Power | (3ΦW) | 7.2 |
Screw Heating Zone | (Zone) | 3 |
HPDE Output | (kg/h) | 90 |
Oil Pump Power | (KW) | 7.5 |
Clamping Force | (KN) | 65 |
Mold Stroke | (mm) | 148-508 |
Max. Mold Size | (W×H)(mm) | 380×390 |
Max. Die Diameter | (mm) | 145 |
Die Heating Power | (4ΦKW) | 2.5 |
NO. of Heating Zone | (Zone) | 3 |
Blowing Pressure | (MPa) | 0.6 |
Air Consumption | (M3/min) | 0.6 |
Cooling Water Pressure | (MPa) | 0.3 |
Water Consumption | (L/min) | 60 |
Machine Size | (L×W×H)(m) | 2.9×2.1×2.7 |
Machine Weight | (Ton) | 7.8 |
blow machine