1. IGBT inverter technology and precision constant currentfeedback control technology, soft switch, DC output, high working efficiency;
2. Wide working voltage range, strong adaptability toelectricity power grid, high ability of interference resistance, stable cuttingcurrent and steady arc, automatic voltage compensation;
3. Thermostatic protection, over-voltage protection,over-current protection, under-voltage protection;
4. Secondary boost for arc striking, ensure no breakdown of the coil;
5. Intensive arc, high cutting speed, narrow andsmooth kerf,continuous current regulation, little distortion for work-piece, safety andreliable for operation;
6. Applicable to automatic cutting equipment;
7. Suitable for stainless steel, aluminum, copper, titanium,cast iron, carbon steel, alloy metal, etc. ;
8. Completeaccessories: air cooling cutting torch, earth clamp, compressed air regulator,etc.
Parameter of Plasma Cutter LG120Model Spec. | LG120 | |
Power supply voltage | AC 380±10%V / 50~60 Hz | |
Power supply capacity | 20 kVA | |
Duty cycle | 60% | |
Current range | 20-120 A | |
No-load voltage | 275 V | |
Power output voltage | 128 V | |
Arc start | Touch / Untouch | |
Cosφ (η) | 0.93 | |
Protection grade | IP21 S | |
Insulation grade | B | |
Air pressure | 0.6 MPa | |
Cutting Thickness | Steel | 1-45 mm |
Aluminum | 1-30 mm | |
Copper | 1-25 mm | |
Weight | 42 kg | |
Dimensions (mm) | 576×297×557 |