High Quality Air Plasma Cutter 40
FEATURES AND BENEFITS:
* Feed-back circuit is controlled by advanced IGBT technology, output current is stable.
* Cutting current can be adjusted continuously from 20Amps to Max current, be able to meet the demands of different materials, thickness and cutting speed.
* Non-contact arc starting mode without HF, little interference to the nearby electronic equipment.
* Applicable to cut carbon steel, stainless steel, galvanized steel, copper and aluminium, etc.
* Input voltage is three phases 380V 15%.
* With protection functions of short phase, over or low voltage, overheat or low air pressure.
TECHNICAL SPECIFICATIONS:
Model | CUT 40 |
Input Power (V) | AC220V±15% |
Input Power Frequency (Hz) | 50/60 |
No-load Voltage (V) | 230 |
Rated Input Current(A) | 30 |
Welding Amperage Range (A) | 20-40 |
Rated Output Voltage(V) | 96 |
Duty Cycle (%) | 60 |
No-load Loss (W) | 40 |
Arc-starting | Touch |
Efficiency (%) | 80 |
Power Factor (COSφ) | 0.73 |
Insulation Grade | F |
Protection Grade | IP21 |
Recommended Air Pressure (Mpa) | 0.4-0.5 |
Cutting Thickness (mm) | 1-16 |
Net Weight (kg) | 7.8 |
Dimensions (mm) | 370*153*290 |
Each machine has been tested to ensure without any problem.
Pipeline engineering
A few of samples:
QUALITY & INSPECTION
* Cooperate with good reputation suppliers
* QC check from spare parts to finished products
* Strict accelerated aging testing on every each machine before packaging
PACKAGE
* Standard export cartons with plastic foam normally
* Customized package also available per your requirements
PAYMENT TERMS
* T/T
* Confirmed irrevocable letter of credit (L/C) opened in our favor