DIN standard high pressure rubber joint: Size: DN32mm--DN600mm Rubber material: EPDM, NBR, NR, Neoprene Pressure: PN10 16 25

DIN standard high pressure rubber joint:Size: DN32mm--DN600mm Rubber material: EPDM, NBR, NR, Neopreneworking Pressure: PN10 16 25

Rubber sphere: Single sphere 

The connecting size standard of flange is DIN 2576 PN10

 

Material of Each components:

 

No.	Name	Material
1	Outer/inner rubber	NR,EPDM,NBR
2	Key frame	Nylon cord fabric
3	Pressurized ring	Steel Wire Strand
4	Flange	Q235

Technical Conditions

Type	I	II	III
Work pressure MPa(Kgf/cm2)	1(10)	1.6(16)	2.5(25)
Explosion Pressure MPa(Kgf/cm2)	3.0(30)	4.8(48)	5.5(55)
Vacuum KPa(mmHg)	53.3(400)	86.7(650)	100(750)
Applicable Temprature oC	-15~115
Applicable Media	water,sea water,hot water,oil,acid,alkali etc

Main connecting dimension:

Nominal diameter		outer diameter of flange	Diameter of the central ring of the bolt	flange thickness	hole diameter quantity d.-n	Axial displacement		Horizontal displacement	Deflexion angle (a1+a2)º
mm	inch	mm	mm	mm		extension (mm)	compression (mm)	mm
32	11/4"	140	100	16	18-4.	6	9	9	15º
40	11/2"	150	110	16	18-4.	6	10	9	15º
50	2"	165	125	18	18-4.	7	10	10	15º
65	21/2"	185	145	18	18-4.	7	13	11	15º
80	3"	200	160	20	18-8.	8	15	12	15º
100	4"	220	180	20	18-8.	10	19	13	15º
125	5"	250	210	22	18-8.	12	19	13	15º
150	6"	285	240	22	22-8.	12	20	14	15º
200	8"	340	295	24	22-8.	16	25	22	15º
250	10"	395	350	26	22-12.	16	25	22	15º
300	12"	445	400	26	22-12.	16	25	22	15º
350	14"	505	460	28	22-16.	16	25	22	15º
400	16"	565	515	32	22-16.	16	25	22	15º
450	18"	615	565	38	26-20.	16	25	22	15º
500	20"	670	620	38	26-20.	16	25	22	15º
600	24"	780	725	38	30-20.	16	25	22	15º

package: each joint will be put into single carton then into wooden case

DIN standard PN25 EPDM rubber expansion Joints