corrugated carton production line speed:0-80m/min Effective width: 1400mm-2200mm CE/ISO

  corrugated carton production line

 

ZJ-F Shaft-less Mill Roll Stand 

Purpose and Characteristics

1.The structure is double rotary shaft with four arms; Support two paper mill rolls on both arms at the same time.

 2.Round-plate type manual brake, the web tension is adjusted at any time.

 3.Arm Clamp and rotary structure set fixed torque clutch, operate safety.

 4.Maximum paper roll diameter:φ1400mm.

 5.Maximum support weight:2T.

SF-280S Fingerless Type Single Facer

Purpose and Characteristics

1.Design Speed: 80m/min

2.Effective width: 1400mm-2200mm

3.Corrugated roller:φ280mm

4.Drive reducer box with oil immersed type lubricating to reduce noise keep running stable. adopt gimbal transmission. separate power.

5.Corrugating roller, pressure roller and glue roller by pneumatic adjustment.

6.Cardboard transmit adopt vacuum suction method, with wind control system. keep flute profiles stable of the lower-roller in the 7.Bearing of corrugated and pressure roller adopt high temperature lubricate grease.

8.Glue parts auto supply glue circularly.

9.The upper-lower corrugating roller are made of 48CrMo high quality alloy steel, after heat-treatment. The hardness HRC58°-60°,the surface be grinded.

10.The glue part surface are treated by special mesh snicked and chromeplated.

11.electric glue width dividing to match the paper width

DWQJ series sheet cutter machine

DWQJ series circle the tube paper roll knife to slice paper machine, main use come circle the tube paper cut into Flat sheets of paper of specification needed, have structure simple, adjust convenience, the service life be long etc. advantage

Purpose and Characteristics: 

The structure is rational ,easy and simple to handle and with low noises.

With four set slitter knives, crosscut 400mm-2400mm.

Cut paper precision±2.5mm

Note: include trolley for carry the roller paper

Note: include Glue tank for mix the glue.