CG-60SR

Acceptable sheet width

90-740mm (roll sheet:90-640mm), 3.6" - 29.1" (3.6"- 25.2")

Effective cut area*1

Normal : 586mm x 51m (23.1" - 167')Expand : 606mm x 51m (23.8" - 167')

Maximum speed

85cm/s (33.4"/s) pen-up speed at 45°

Adjustable speed range

1-10cm/s: 1cm step (0.39"-3.94"/s: 0.39" step) 10-60cm/s: 5cm step (3.94"-2.36"/s: 2.0" step)

Repeatability

±0.2mm (excluding shrinkage/expansion caused by the film temperature)

Guaranteed cutting range

586mm x 2m (23.0" - 78.7")

Maximum cutting force

400g

Range of down pressure

Cutter

10~20g(2g step), 20~100g(5g step), 100~400g(10g step)

Pen

10~20g(2g step), 20~100g(5g step),100~150g(10g step)

Acceptable sheet width

Marking film up to 0.25mm (0.001") thickness: Vinyl, Fluorescent type vinyl, Reflective sheet *2

Applicable tools*3

Cutter, Water based ball-point pen, Oil based ball-point pen

Command

MGL-IIc

Interface

USB

Receiver buffer size

30 MB (20MB when in sorting)

Operational conditions

5~35°C(41~95°F), 35~75%Rh, No-condensation

Power requirement

AC100V~240V Less than 100VA

Dimensions (WxDxH)

960 x 430 x 335mm (37.8" x 16.9" x 13.2")

Weight

18kg (39.7lbs.)

All trademarks or registered trademarks are the property of the respective owners.Specifications are subject to change without notice.

*1:

Maximum sheet feeding length differs depending on the software.

*2:

Provided that the blades specific to fluorescent type vinyl (SPB-0007) and reflectivesheet (SPB-0006) are used.

*3:

Ball-point pen in the market can be used with the standard pen holder. The goods on the market are φ8-9mm(0.32"-0.35")pen. No guarantee with accuracy.