Ads by Google
automatic non woven narrow fabric paper slitting machine 1.Computer control and easy to operate2.Dedicated to cutting non-woven fabrics
Production
Machine Features
The machine features: computer operation is convenient, the cutting precision is high, stable
and efficient. On the winding tension control, respectively; Running speed adjustable, cutting length
automatic meters; Roll automatic correction device can be used to correct the irregular membrane,
waste reduction; With a fan and waste can be the blow of a waste.
Machine configurations
Control system | Install button centralized control, flexible operation and convenient. |
Unwinding part | Automatic correction unwinding institutions, with constant tension system. Or use mechanical unwinding frame unwinding, tension magnetic powder brake control, without correction. |
Put volumes tension control | Put the roll tension magnetic powder brake control, manual adjustment. |
Cutting part | Circular knife active cutting. Equipped with set by the meter counter, convenient calculation rewinder length. |
Rewinder part | Double sliding shaft rewinder, nonwoven material characteristics in design, for non woven elastic, and don't like film thickness even as with common gas up the winding shaft, in cutting article wide when difference effect,but cutting article narrow will cause some volume is loose, some volume is tight,theresult is the winding irregular. Use sliding shaft rewinder, can let paper tubes in the shaft has certain sliding, ensure that each volume of the tightness of rewinding are the same, can in cutting articlenarrow when also can achieve good uniformity of rewinding. |
winding tension control | The winding tension by the magnetic powder clutch to control, in accordance with the actual diameter tension calculation, tension control and more accurate stability, operation more easy. |
Waste edge processing | Equipped with fans and waste side wind, waste materials edge automatic blow out. |
Main technical parameters
Model | SCM-FD1800 |
Max. Unwinding width | 1800mm |
Max.unwinding diameter | Φ700mm |
Unwinding deviation-rectifying precision | ±0.5mm |
Paper core inner diameter | φ76mm(or as client requirements) |
Min.dividng-cutting width | 15mm |
cutting speed | 5-160mm/min |
Cutting Precision | ±0.1mm |
Thickness of materials | 40-300g/m2 |
Max.winding diameter | φ600mm |
Paper core inner diameter | φ39.5mm(or as client requirements) |
power | 4.5kw |
Voltage of power supply | AC380v 50hz |
Gas power | 0.8mpa |
Machine weight | 1000kg |
Overall dimension(L*W*H) | 2700×1650×1250m |