waterproofing coating Jot66 is made by pure polyurethane. environment-friendly. No toxity after curing; GB/T19250-2003;

1.      TECHNICAL DATA SHEET(1):

Testing Items(2)	Performance
Appearance	black
Density(g/cm3)	1.35±0.1
Sagging properties(mm)	Self-leveling
Tensile strength(Mpa)	≥2.45
Elongation at break(%)	≥550
solid content(%)	≥85
Touch dry time(h)	≤6
Pollution properties	Non
Application temperature(°C)	+5~+35
Shelf life(month)	9

Note:

(1)All data above ware tested under standardized condition.

(2)All data listed in the chart were series; please refer to the related datasheet for special items.

(3)Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.

2.      DESCRIPTION:

Jot66 is is a kind of coating made by pure polyurethane . It is applied on substrates, to form a firm, soft and seamless sealing film by chemical reaction with moisture in the air.Jot66 is manufactured in accordance with the GB/T19250-2003.

 

3.   USES: 

·Waterproofing for basement, kitchen, bathroom, underground tunnel, deep wells structure and normal decoration.

· Leak-proofing and penetrating-proofing of Reservoirs,water towers,swimming-pool,

    Bath-pool,fountain pool,impounding reservoir,sewage cleaning pool and irrigation channel.

· Used for preventing of leaking,corrosion and penetrating for water tanks,underground

   Pipeline.

· Bonding and moisture-proofing of various floor tiles,marble ,asbestos plank and so on.

4.      ClEANING:

Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.

5.      PACKAGING:

25kg/bucket

6.      APPLICATION:

The substrate should be smooth, solid, clean, dry without sharp concave and convex points, honeycomb, pocking marks, peeling, free of bulges, greasy before application.it is better coating 3 times with scraper. When the first coat isn’t sticky, the second coat can be applied, the first layer is recommended being applied in thinner layer for better releasing gas generated during reaction. The second coat should be applied in different direction to the first coat. The optimal coating rate is 2.0kg/m² for thickness of 1.5mm.

7.      ADVANTAGES:

* Pure polyurethane sealant,environment-friendly.

* Contains no asphalt, tar or any solvents, no harm to construction personnel. 

* Free from pollution to the environment, No toxity after curing, No corrosion to base material,High solid content.  

* One component, convenient for construction, No need of mixing,surplus products should be kept in good airproof package.

* Efficient:High strength and elasticity,resistant to acid and alkali,excellent bonding effect with concrete,tile and other substrates.

*Cost-effectice:the coating expands a little after curing,which means it turns a little bit thicker after curing.

* All items tested exceeds nation standard GB/T19250-2003.

8.      ADVICE:

* Jot66 should be inverted in dry and shady indoor, avoid sunlight

and moisture.

* It is normally that a film formed on the surface of coating. It can be

used normally when removing the film.

* The rest coating should be sealed in order to avoid moisture.

* Pay attention to protect the waterproofing membrane during constructing

period and after finished.

* Warehouses and construction of the site is strictly prohibited fireworks.

waterproof coating Jot 66

Verified Information This information is Verified by TÜV Rheinland and is valid for the following period: 2013/02/24 --- 2014/02/24 All the information below may covers both Gold Supplier and its related companies , Their Relationship will be affirmed according to china laws and regulations , also it will be clearly display in the full report >> Production Capacity: Product line name Production Line Capacity Actual Units Produced(Previous Year)

Polyurethane Sealant	550 Tons / Month	6,000 Tons

Export Market Distribution: Market Revenue(Previous Year) Total Revenue (%)

North America	confidential	3.4
South America	confidential	7.6
Eastern Europe	confidential	4.2
Southeast Asia	confidential	6.6
Africa	confidential	1.5
Oceania	confidential	0.7
Mid East	confidential	1.2
Eastern Asia	confidential	0.5
Western Europe	confidential	0.1
South Asia	confidential	0.7
Domestic Market	confidential	73.5

Production Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

Multi-function Mixed Reaction Kettle	HONGFA	9	9.0	Acceptable
Heat Seal Machine	RH-ViiiD	3	4.0	Acceptable
Multi-functional Mixer	M250	8	5.0	Acceptable

Testing Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

High and Low Temperature Tensile Tester	HD-607	1	4.0	Acceptable
Universal Tensile Tester	WDT-10/10KN	1	9.0	Acceptable
QUV Tester	No Information	1	3.0	Acceptable
Constant Temperature and Humidity Experiment Box	No Information	1	0.9	Acceptable

Production Flow: 1.Dosing 2.Mixing and Polymerization 3.Packing Testing Report: Report Picture Report Name Report By Product Name & Model No. Report Date

	Test Report	GRGTEST	PU Sealants	2011/07/25
	Test Report	SGS	WOOD FLOOR ADHESIVE	2010/12/28
	Test Report	National Research Center of Testing Techniques for Building Materials	Wood Floor Adhesive	2010/03/08