titanium dioxide for road marking paint mainly use for paint, coating, plastic, printing ink etc.. high whiteness, gloss

     high quality and good price titanium dioxide for road marking paint                                       

Characters:

High glossEasy for damping and dispersionHigh weather resistance performance and hiding powerThe white products have high whiteness and stable hue

Basic Characters:

Process--------------------------------- Rutile paint produced by sulfate process

Surface treatment--------------------- Treat with aluminum etc, Special organic substance covering

Standard classification(ISO591-1)----------------------------------------- R2

Specific gravity(ISO787-10)------------------------------------------------ 4.0g/cm3

TiO2content(ISO591-1)------------------------------------------------------ 93.5% min.

105°C volatile under package(ISO 787-2)--------------------------------- 0.5% max.

Soluble Substances(ISO 787-2)--------------------------------------------- 0.5% max.

Residue on sieve(45μm)(ISO787-18)----------------------------------- 0.05% max.

Rutile transformation rate--------------------------------------------------------- 98% min.

Application:High-level Solvent Type Coating, High gloss paint for interior and exterior wall, industrial paint, Surface Printing Ink, Iron printing Coatings (Ink), powder coatings, plastic masterbatch profile.

 

Specification:

Whiteness of oil systerm(L*)Note1-------------------------------------------94.7-95.5

Hue (b*)Note1-------------------------------------------------------------------1.5-2.1

Relative Scattering Strength(ISO 787-24)-------------------- Close to the sample(95-105)%

Color within the color system (ISO 787-25)----------------- Close to the sampFe colorE≤0.3

PH Value of aqueous suspension(ISO 787-9)-------------------------------- 6.5-8.0

Oil Absorption volume(ISO 787-5)-------------------------------------------- ≤20g/100g

Resistivity of aqueous extract(ISO787-14)------------------------------------ ≥150Ω·M

Dispersion under high-speed mixing of Alkyd system Note.2-------------------- ≤30μm

Test instructions:

1. Test for Whiteness of oil systerm ( L* ) and Hue ( b * ): Grind the Titanium dioxide with grinding mill, to make a film with thickness of 100μm. Calibrate with ASTM standard ceramic tile by Differential Colorimeter .Then test the surface of the film and indicate with CIE L*,a*,b*

2. Test for Dispersion under high-speed mixing of Alkyd system: In the alkyd resin system, test with Scraper fineness gage after dispersion by high-speed mixer. Other items please refer to ISO standard.

high quality and good price titanium dioxide for road marking paint