DPXB Blister packing machine is mainly used for paper-plastic sterile packaging for medical dressing and instrument products.

XB series blister packing machine is mainly used for paper & plastic composite packaging for disposable medical devices such as needles, syringes, infusion sets, etc., as well as medical dressings such as gauze, surgical towels, bandages and etc., also can be used in food industry for plastic & plastic composite packaging for meat products. The form of packaging can be in choice of customer’s requirement, i.e. vacuum packaging, filling nitrogen packaging, PVC, PET, PS etc. formed box packaging.

Feature:

Most parts of equipment are made of aluminum or stainless steel, hygienic design for packaging without second dirty.Good device configuration to ensure the equipment long-term reliability. Control system and servo drive use Mitsubishi PLC, Mark identification system uses Japan Omron color sensor (electric eye), Pneumatic components mainly use Japanese SMC products (solenoid valve, cylinder, etc.),rodless cylinder selects German ORIGA products. Germany BUSCH vacuum pump R5-0040F (with air filters)High rigidity of the hot mold frame and double-balloon compression device to ensure that equipment with highly efficient operation and perfect quality sealing. To adopt both electric eye identifiable sensor and paper brake linkage control paper tension, achieving accurate aligned packaging for printing, seal and forming blister.Cross-cut unit is by Rolling cross-section cut, to ensure that no scraps of paper cutting, more straight tangent.

Parameters:

Max packing width:400mm ( width of bottom film: 422mm)Max packing length:400mmMinimum packing width:70mmMax forming depth: 70mmFlexible film packaging work cycle: 12-18moulds/min, rigid film packaging work cycle: 8-10moulds/minTo adopt Japanese OMRON electric eye tracking device, and paper tension control device, accurate to the version of packages.Flexible film packaging: Each mould can be in two rows packing(within the range of die), rigid packaging: only for single row packing.Both forming and sealing station are with security protect cover, as well as with the power-off protection.Flexible film cross-section with rotary cutting methods, and rigid film cross-section with a knife broke the molding method (to ensure that the box surrounding the fillet). Longitudinal shear mode using the upper and lower pole.Heat sealing pressure with air bag form, the bottom of sealing die using full-page textured silicon gasket.Power supply: three-phase, 380 VAC, 50 HzPower: Max 15 ~ 17 kwOutside dimension: 7745×1090×1756 mmNet Weight: 2 tons.Air consumption: 600L/minAir pressure: ≥ 0.6 Mpa (continuous use)Film spec: width 440- 442 mm, 3inch(Φ76mm)diameter of pipe, outside diameter≤Φ400mmPaper spec: Width 425 - 430 mm, 3inch(Φ76mm)diameter of pipe, outside diamter≤Φ400mmCooling water: pure water,≥40 L/hour,≤25°C

  20.   Condition: dry,clean,10 -45°C

 

Parameters	Series( XB40B is standard, XB40C is compatible for)
	XB30B	XB30C	XB40B	XB40C	XB47B	XB47C	XB52B	XB52C
Max width(mm)	300	300	400	400	470	470	520	520
Max width in vacuum(mm)	296	296	396	396	466	466	516	516
Max length(mm)	400	400	400	400	400	400	400	400
Max length in customize(mm)	600	_	600	_	450	_	450	_
Min width(mm)	19	80	19	80	19	80	19	80
Max depth(mm)	80	80	80	80	80	80	80	80
Max frequency(/min)	15	10	15	10	14	10	13	10

High Speed XB40C Multi-use Blister packaging machine