Features
Whole-body type wheels make feeding smooth and stable.
Aluminum frame is much stronger.
4 wheels are good for getting stable pressure.
Design without dust removal will avoid dust pile up.
Parts take cast aluminum.
Gears and pulleys are well machined.
Extension bar with rack can stay at any position during operation.
TEFC motor with more cooling fins avoids over-heat.
Specs
Model | V-480/V-380/V-880 |
Switch | Forward/reverse Barrel with 2 speeds |
Cord | 16 gauge, 3m length |
Recommended breaker size | 15amp |
Motor type | TEFC capacity start induction |
Power | 750w/550w |
Speeds | 2800/1400rpm |
Amps | 2.18/1.8amp |
Poles | 2/4 |
Starter | Full voltage direct start |
Direction | Forward/Reverse |
Min. length allowed | 1800mm |
Feeding speed | 8 steps |
Speed range | 3.5/5/7/10/12.5/16/25/32 m/min |
Feeding direction | Forward/Reverse |
Feeding wheels | 3 or 4 or 8 |
Width of feeding wheel | 60mm |
Dia. of feeding wheel | 120mm |
Feeding wheel | Synthetic rubber |
Machine frame | Cast aluminum |
columns | Steel tube, Φ58mm |
( function(){ var aBigImageSrc = [ 'http://i00.i.aliimg.com/photo/v7/406113020_1/Heavy_duty_power_feeder.jpg' , 'http://i00.i.aliimg.com/photo/v7/406113020_2/Heavy_duty_power_feeder.jpg' , 'http://i00.i.aliimg.com/photo/v7/406113020_3/Heavy_duty_power_feeder.jpg' , 'http://i00.i.aliimg.com/photo/v7/406113020_4/Heavy_duty_power_feeder.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Heavy-duty power feeder