Ads by Google
CNC waterjet cutting equipment Technology
Tap water is impressed to 200-400Mpa by UHP Intensifier, and then a waterjet with high speed of 800-1000m/s is made through a small gem nozzle with bore size of 0.1-0.35mm. This waterjet has high energy and it can cut soft materials such as paper, rubber, sponge, etc. Furthermore, if mixed proper quantity abrasive, it can cut all kinds of soft and hard materials such as glass, marble, ceramics, stainless steel, etc
The CNC waterjet cutting equipment includes three main parts,the following is main charactors:
1. Cutting table: a.cantilever style,easy to load and unload material,
b.separated body between cutting table and platform,
c.X beam of cutting table applies the one-off extrusion forming aluminum alloy,
d.Load-bearing beam with overall shield to avoid dust,
e. flexible coupling of motor and ball screw, high qualiy ABBA ball screw and linear guide,
f.use fluorocarbon coating, more than 20 years of corrosion resistance
Models of cutting table we can offer:
HD1020F | HD1525F | HD1530F | HD1540F |
1000mm*2000mm | 1500mm*2500mm | 1500mm*3000mm | 1500mm*4000mm |
2. Intensifier pump: a. IWP intenfier pump from the USA
b. Electronic Direction Regulation
c. 7-inch Touch Screen, Man-machine Interface Indicate Working Conditions & error
d. Maximum Flow of Hydraulic Pump: 90L/min
e. Maximum Discharge Capacity: 3.7L/min
f. Integrated heat exchanger, high heat exchange ratio and good effect
g. Two-step up water supply
h. Few wear parts in the intensifier,save the cost
3. CNC controller: a. 19inch LCD
b. Support DXF file ,can use AUTOCAD to produce DXF file
c. use IPC and the professional software based on windows XP
d. use Omron PLC instead of relay
4. Other accessories: auto abrasive system, on/off valve and hp tubing
5. Detail advantages of the waterjet cutting equipment:
waterjet cutting equipment sampes:
Economy CNC waterjet cutting equipment with high pressure pump and CNC control