1.Reflow 2.BGA rework station ZX-D2 3.English software hot air and IR 4.Touch screen 5.Repair laptop PS Xbox360

ZX-D2 BGA rework station, reflow

Features:

 

1. With PLC user interface control, display actual temperature of three zone and a test temperature curve, can export temperature profile;

2. With three independent temperature zone control, upper and bottom main heater with hot air to heat, third zone with infrared to preheat;

3. Three heater with 9 segment temperature up (down)+9 segment constant temperature control, can store 40 groups temperature curve; 

4. Three heating zone with independent PID to control heating process, more stable and accurate;

5. Bottom heater and IR preheating zone with supporter to prevent welding zone part deformation;

6. After removal and welding with cooling fan to cool PCB board, ensure welding effect;

7. Temperature profile parameter with password protection;

8. Equipped with a variety size of hot-air nozzle, or made according to special requirements;

9. Build-in vacuum pump, no need gas sources.

 

SPECIFICATION:

 

PCB Size	Max L500*W300mm
PCB Thickness	0.1~5mm
Temperature Control	K thermocouple  PID Closed loop
PCB Positioning mode	Outer
Bottom preheat	Infrared  2400W
Main (Top+bottom) heater	Hot air  800W+800W
Power supply	Single phase  220V,50/60Hz,4.0KVA
Dimension	L650*W700*H550mm
Weight	Approx. 70kgs

 

ZX-D2 touch screen bga rework station three heaters reflow