Ads by Google
I.NBC SERIES WELDING MACHINE WITH CCC&CE APPROVED
Model : NBC-200Y/250Y/250F
II.MAIN TECHNICAL PARAMETER
| MODEL ITEM | NBC-200Y | NBC-250Y | NBC-250F |
| Input power voltage,Frequency (V,HZ) | AC380(THREE PHASES)±10% 50/60 HZ | ||
| Rated input power capacity (KVA) | 8 | 12 | 12 |
| No-load voltage (V) | 42 | 42 | 42 |
| Output current adjustment range (A) | 50-200 | 50-250 | 50-250 |
| Rated output voltage adjustment range (V) | 16.5-24 | 16.5-24 | 16.5-24 |
| Rated duty cycle (%) | 60 | 60 | 60 |
| Efficiency (%) | 85 | 85 | 85 |
| Pover factor (COSφ) | 0.93 | 0.93 | 0.93 |
| Type of wire feeder | INSIDE | INSIDE | OUTSIDE |
| Gas post-flow time (S) | 1±0.5 | 1±0.5 | 1±0.5 |
| Wire feeding speed(M/MIN) | 2.5-13 | 2.5-13 | 2.5-13 |
| Diameter of coil (MM) | 270 | 270 | 270 |
| Earth cable (MM2) | ≥2.5 | ≥2.5 | ≥2.5 |
| Diameter of welding wire (MM) | 0.8/1.0 | 0.8/1.0 | 0.8/1.0 |
| Welding thickness (MM) | ≥0.8 | ≥0.8 | ≥0.8 |
| Weight (KG) | 34 | 35 | 24 |
| Measurement (MM) | 655x295x610 | 655x295x610 | 480x205x355 |
| Insulation class | F | F | F |
| Protection class | IP23 | IP23 | IP23 |
III.STANDARD ACCESSORY LIST&PICTURE
1. A set of welding torch.
2. A set of earth clamp with fast coupling device.
3.Two meters of gas carrying hose with two clips.
1.A set of welding torch.
2. A set of earth clamp with fast coupling device.
3.Ten meters of gas carrying hose with two clips.
4.Ten meters of 7x1 control wire with 7 core-plug.
5. Ten meters of welding cable with connectors.
6. A set of wire feeder.
IV.CHARACTERISTIC
1.Integrate wire feeder with power together.
2.Easy operation, high speed in welding without any interruption, high successfully Rate of arc-starting.
3.Little splash, deep welding pool,beautiful welding seam, heat-proof and Spilt-proof.
4.Suitable for mild steel, low carbon steel, alloy steel etc and suitable for welding the thin-palte(0.8MM).
WELDING MACHINE(NBC 250Y CO2/MIG/MAG GAS WELDER)