turning roll 1.CE SGS ISO9001 2.sand blasting 3.Taiwan Inverter,schneider electric,Siemens motor. 4.rubber,steel,Pu roller.

Conventional rotator (turning roll  turning roller welding rotator)

welding rotator (turning roll, roller bed):

-Composed of driving/power unit, idler unit, electric cabinet and manually controlled panel.

-Manual controlled panel with buttons makes operation much convenient.

-Distance between rollers can be adjusted by bolt to fit pipes/tanks with different diameters.

-Frequency speed control is applied for the adjustment of roller speed.

-Two steel rollers are used at both ends of rubber rollers to protect rubber rollers.

-Rollers material could also be polyurethane or steel.

-Widened rollers increase life span of rollers and reducer pressure on pipes/tanks.

type: HGK-200  steel roller

loading capacity: 200ton

roller speed: 6-60m/h

speed adjust: VFD

diatance adjust: screw/arbor

Type	Loading Capacity (kg)	Tubes/pipes Dia. (mm)	Roller Dia. and Width		Roller speed (m/h)	Motor Power	Roller Distance Adjust	Speed Adjust
			PU roller (Optional)	Metal roller (optional)
HGK-2	2000	Φ150-2000	Φ200×100		6-60	2 ×0.18	Manual Lead Screw or Bolt Grading	Variable Frequency Drive (VFD)
HGK-5	5000	Φ250-2800	Φ250*120	Φ244×16*2	6-60	2 ×0.37
HGK-10	10000	Φ300-3200	Φ300*150	Φ294×25*2	6-60	2×0.55
HGK-20	20000	Φ500-4500	Φ350*180	Φ344×30*2	6-60	2×1.1
HGK-40	40000	Φ500-5000	Φ400*220	Φ394×50*2	6-60	2×1.5
HGK-60	60000	Φ500-5000	Φ450*150*2	Φ444×50*2	6-60	2×2.2
HGK-80	80000	Φ800-6000	Φ500*180*2	Φ494×60*2	6-60	2×3
HGK-100	100000	Φ800-6000	Φ500×200*2	Φ494×80*2	6-60	2×4
HGK-200	200000	Φ800-6500	/	Φ700×250	6-60	2×4
HGK-300	300000	Φ800-6500	/	Φ800×300	6-60	2×5.5
HGK-500	400000	Φ1000-8000	/	Φ800×350	6-60	2×7.5
HGK-800	500000	Φ1000-8000	/	Φ900×400	6-60	2×11