1.English menu, large color touch screen, and simple operation 2.Save 1000 test results

SAT-701F ADSL2+ Tester is a hand-held communication instrument that supports batteries as power supply, and has a large color touch screen with English display. This product is particularly applicable for the field cutover, acceptance and maintenance of ADSL equipment, and can be widely used by ADSL business operators like Telecom, Rail Company, etc, and is the best choice of ADSL engineers and technicians.

For ADSL physical layer

- Fast channel and interleave channel.

- Line parameters testing: up and down channel rate, line attenuation, noise margin, transmitting power, and use rate of channel.

- Performance analysis of line error and alarm:

Detection of interleave channel FEC forward error correcting code count at proximal end and remote end;Detection of fast channel FEC forward error correcting code count at proximal end and remote end;Detection of interleave channel CRC error frame count at proximal end and remote end;Detection of fast channel CRC error frame count at proximal end and remote end;Detection of interleave channel HEC error frame count at proximal end and remote end;Detection of fast channel HEC error frame count at proximal end and remote end;Detection of interleave channel NCD error frame count at proximal end and remote end;Detection of fast channel NCD error frame count at proximal end and remote end;Detection of interleave channel OCD error frame count at proximal end;Detection of fast channel OCD error frame count at proximal end.

- DMT sub-channel carrier pattern

       Display modulated bit numbers on each DMT sub-channel by diagram and digital mode

- Display user s connection state and testing progress at real time, and present information of local equipment manufacturer and version.

For ADSL network layer

-  ISP PING test

       Verify the connectivity of user to ISP provider.

-  WAN PING test:

       Directly PING the website IP or web address to local WAN to verify the connectivity of WAN link.

- Completely instead of ADSL MODEM to simulate ISP logon, and verify the operation performance of user's terminal equipment.

- Testing for VPI/VCI.

- Webpage browsing

       Browse the Web by browser, to verify the speed rate is normal or not.

- Testing of network layer:

       It includes testing functions: Ping, Ipconfig, Route and Tracert.

- Testing for webpage speed

- Testing for FTP client-side.

For ADSL LAN

- LAN PING test

     Verify the PC in connection failure within LAN.

- Webpage browsing

      Browse the Web by browser.

- Testing of network layer:

      It includes testing functions: Ping, Ipconfig, Route and Tracert.

- Testing for webpage speed

- Testing for FTP client-side

- Testing for PPPoE dial-up.

- Testing function for Network Neighborhood.

     Test for LAN, and search the PC within this LAN, check the PC name, IP and MAC address.

- Simulated PC logon

     Simulate user terminal PC logging on ISP provider to verify if ADSL user can surf on the Internet.

For ADSL line

Digital multi-meter (DMM) test

     Test AC/DC voltage, loop resistance, insulation resistance, capacitance, etc.

Estimate the distance of telephone wire.

Technical index

Connectors: RJ11 --- WAN interface; RJ45 --- LAN interface; USB --- interface

Applicable standards: ITU G.992.1(G.DMT); ITU G.992.2(G.lite); ITU G.994.1 (G.hs); ITU G.992.3(ADSL2);RE-ADSL; 

                          ITU G.992.4(Splitterless ADSL2); ITU G.992.5 (ADSL2+); ITU G.992 AnnexL; ANSI T1.413 Issue 2.

Upper layer protocol support: PPP over Ethernet (PPPoE); Ethernet over ATM (RFC-1483B); RFC-1483R

Line performance index: Down speed: 24Mb/s, and Up speed: 1.2Mb/s. Maximum transmission distance 6.5Km

Digital multi-meter:

       DC voltage: -400V~+400V, accuracy:  5% 2V

       AC voltage: 0~290V, accuracy:  5% 2V

       Line loop resistance: 0~20K , accuracy:  3%

       Insulation resistance: 0~1.0M , accuracy:  0.1M ; 1.0~50M ,

       accuracy:  10% 0.5M ;

       Capacitance: 0~10nF,accuracy:  2nF; 10~1000nF, accuracy:  5%

Other parameters

Power supply

1) Special power adapter

         INPUT: AC220V 50Hz    OUTPUT: DC 9V 1.2A

2) Built-in rechargeable battery

         4000mAh 7.2V rechargeable lithium battery

         Working time: 8 hours

         Charging time: 6 hours in closed state, and 10 hours in open state

Dimensions and weight:

         L W H: 220 162 48mm        

Weight: 900g

Ambient parameters:

         Working temperature: -10 50

         Storage temperature: -30 +70

         Humidity: 5% 90% non-condensing

SAT-701F ADSL2+ Tester