Red flashing beacon Medium Intensity lights LED aviation obstacle lamp Aircraft Warning Light Aviation Obstruction Lightin

ABC-7M Medium intensity obstruction light for marking towers (Telecom, GSM), smokestacks, buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light. The enclosure of ABC-7M is made of die casting aluminum with powder coated finish, with the advantages of light weight, waterproof, shockproof and corrosion resistant. Self-contained wiring compartment, ease of mount. Light source consists of external long life LEDs, to ensure maximum life of the product.

Specifications DescriptionParameter

Supply voltage	AC110V ~ AC240V / DC24V / DC48V
Frequency	50Hz ~ 60Hz
Power consumption	60W
-	Steady burning or flashing mode are available
Intensity	≥1600cd
Horizontal degree	360°
Vertical degree	3°mnm
LED lifetime	≥80,000 hrs
Ambient temperature	-40°C ~ +60°C
IP Protection	IP65
Weight	2.7Kg
Dimension	164mm(D) * 239mm(H)
Visible distance	14.5Km (AT=0.85)

Functions & FeaturesModular design and meets optics standard, compact size and high efficiencyBased on LED technologyExtremely reliable - major maintenance cost savingResistant to shock and vibrationsCorrosion resistant lamp& housingSelf-contained wiring compartment - eliminates additional boxesDesigned to mount onto existing bolt pattern installationsBase material-- die casting aluminum LM6Lamp housing -- polycarbonate, with good anti-impact strength, thermal stability, high transmittanceReflector - ABSCombustibility rating : UL94V0IP protection : IP65Operating temperature : -40°C - +60°C, can withstand the most severe environmentSteady burning or flashing type (no need external controller)Typical LED lifetime : ≥100, 000 hrsUse high power LEDs, and all LEDs are connected in parallel, which are powered by low voltage, constant current; when and if one LED fails, it will not affect other LEDS, to improve the stability and reliability of this product.WiringUnfasten two screws fixed on the nameplate and then remove the nameplate panelInsert the power cable from the gland box and then connect them to the corresponding terminals inside the lamp body(see following figure)Verify whether the power cables are well connected before power onNoticeCheck whether the power cables are connected correctly before power onTemperature rise inside the control box is normal phenomenonPlease do not open any components inside by yourselfThis product is a sealed structure; Should not be tampered with by anyone other than registered installerProduct FileModel:  ABC-7MOn Stream Date:  Jul. 3, 2008Applications:  High building, tower, crane, high chimney, lighthouse, high voltage cable tower, oil well, etc.Standard:  MH-T 6012-1999; ICAO Annex 14Certificate: CE certification

Red flashing beacon/Medium Intensity lights/LED aviation obstacle lamp