Overview:
MUX4E1-Tplus is a kind of high-performance, self-educated long-range Ethernet bridge. With low cost, it is fit for bridge connection or LAN stretcher or subsection. MUX4E1-Tplus can learn automatically MAC address in the connected LAN and only transmit the target address to the frame of another LAN. Its 10/100BaseT interface can run in full duplex Ethernet with topology. With transparently sustaining in WAN lines, alterable speed rate will reach up to 7.936Mbps (4 lines E1). There can be one E1 line (1984Kbps); two E1 lines (3968Kbps); three E1 lines (5952Kbps); four E1 lines (7936Kbps); Transmitting speed rate of E1 line is 2048kbps (transparent channels E1, unframed).The transmission lines of MUX4E1-Tplus must be transparent and unframed, which is specially fit for satellites and other wireless broadcast.Features:
*Comply with ITU G.703,G.704,G.706,G.823
*Support transparent E1 channel
*Full comply with IEEE 802.3/IEEE 802.3u /IEEE 802.1Q(VLAN)
*Ethernet port 10/100Mbps,Full/Half Duplex mode compatible
*For E1 interface,75ohm(unbalanced) and 120ohm(balanced) optional
*Allowing 16ms for transmission time delay of 4 E1
*Every E1 take 64Kbps channel depletion,the valid bandwidth is 1984Kbps
*Support bit error-rate testing of every E1 branch. When bit error-rate of some branch is over the limit, the system will automatically turn off and separate the E1 branch
*Auto-detect the valid E1 channels and auto-balanced the data flow among the valid E1 channels
*Comprehensive LED indicators on front panel,convenient for the diagnosis of equipment working state
*-48V DC & 220V AC power supply optional
Specifications:
EthernetLAN MAC: | Automatically learning and refreshing |
Buffer: | Transmitting alignment: 1M*16bit ; |
Receiving alignment: 1M*16bit | |
VLAN: | 802.1Q VLAN |
Standard: | Comply with IEE802.3/Ethernet |
Work mode: | Full duplex/half duplex self-adapting |
Data rate: | 10/100Mbps |
Physical interface: | RJ-45 |
Line speed rate: | 2048kbps |
+/-50PPM | |
Line coding: | HDB3 |
Line framing: | G.703 (unframed) |
Data communication rate: | 1984kbps |
E1 output stability: | <0.05UI |
Transmitting lines: | 4*E1 |
Highest data communication rate: | 7.936Mbps |
Transmitting mode: | Synchronous full duplex; |
HDLC (high-class data chain) | |
Line interface: | RJ45;BNC |
Transmitting specialty: | Comply with G.703 |
Clocking: | Line clock |
Power supply: | AC 220V +/- 10%,50Hz; 48VDC |
Power consumption: | 5W |
Temperature: | 0oC~40oC |
Humidity: | 0 ~95% |
Dimension: | 245mm*215mm*50mm |
(13.6"L*10"W*2.2"H) |
4*E1 Ethernet Converter